Smart Solar Umbrella Fountain - Stone Effect

The fountain uses an integrated solar panel to power a low-voltage pump. When the panel receives direct sunlight, it converts solar energy into electricity, which then drives the pump to recirculate water through the fountain.

No, the fountain operates directly from solar energy and requires direct sunlight to function. It will not run at night or during prolonged periods of heavy cloud cover.

Clean tap water is generally sufficient. Avoid using chemical-treated or extremely hard water, which can lead to mineral buildup on the pump and fountain surfaces.

The frequency depends on local climate, temperature, and sun exposure (evaporation rates). It's best to check the water level daily during warm weather and top it up as needed to ensure the pump remains fully submerged.

Periodically drain the fountain, remove the pump, and clean both the basin and pump with a soft cloth or brush and fresh water. Ensure to remove any debris or algae. Rinse thoroughly before refilling.

No, the fountain is crafted from lightweight resin, making it relatively easy to move and reposition as desired within your outdoor space.

In areas with freezing temperatures, it is highly recommended to drain all water from the fountain and store it in a frost-free location (like a shed or garage) during winter months to prevent damage from ice.

Ensure the solar panel is receiving direct, unobstructed sunlight. Check the water level and refill if necessary. Disconnect the pump and clean it, clearing any debris from the intake filter or impeller.

Drain the fountain completely. Clean the basin and any fountain components with a soft brush and fresh water. Refill with clean water. Regular cleaning helps prevent algae buildup.

This is often due to fluctuating sunlight. Ensure the solar panel is not partially shaded by passing clouds or shadows. Check for any debris partially blocking the pump, causing it to struggle.

Check the water level; overfilling can cause splashing. Ensure the fountain is on a level surface. Info needed: [Adjusting flow rate if applicable, but product data doesn't mention a flow control.]

This often indicates debris caught in the impeller or low water levels. Disconnect the pump, clean it thoroughly, and ensure it is fully submerged in water. If the issue persists, the pump may be faulty.