Inner Tube 12 1/2 x 2.125 - Bent Schrader Valve - PetrolScooter
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The PetrolScooter 12 1/2 x 2.125 inner tube is an essential maintenance component designed for parents and caregivers who rely on strollers, pushchairs, and prams with pneumatic tires. Its primary benefit is providing a reliable, long-lasting replacement for worn or punctured tubes, ensuring a smooth ride for children across various surfaces. While this tube features a versatile bent Schrader valve for easy inflation, users should carefully verify their tire sidewall dimensions before purchase to ensure proper fitment with their specific wheel assembly.
All features
| Model Part Number | NULL |
|---|---|
| Brand | PetrolScooter |
Extended Product Information
FAQs
Will this fit a 12-inch bike tire?
This tube is specifically designed for 12.5-inch stroller and pram tires; please check the exact digits on your tire sidewall before use.
Do I need a special pump?
No, this uses a standard Schrader valve (the same type as a car tire), which works with almost all hand pumps and electric floor pumps.
Is the valve angled or straight?
This model features a bent valve to make inflation easier on tight stroller rims.
How often should I check the air pressure?
It is recommended to check the pressure once a month or whenever the stroller feels harder to push than usual.
Can I use this for a wheelbarrow?
No, this tube is dimensioned for strollers and buggies. Wheelbarrows usually require different sizing and higher weight-bearing specifications.
Troubleshooting
Tube loses air immediately after installation
The tube was likely pinched by the tire levers during installation; remove and check for small 'snake bite' holes in the rubber.
Valve stem is inaccessible or hitting the wheel frame
Ensure the bent portion of the valve is oriented outward. If the tire was mounted backwards, the valve may be forced into an awkward angle.
Tire feels lumpy or uneven
Deflate the tire and 'massage' the casing around the rim to ensure the tube is seated evenly inside without twists or folds.
Pros and Cons
Pros
- Bent valve design simplifies inflation on small wheels
- Compatible with multiple common tire sizes
- Standard Schrader valve is compatible with most pumps
- Reliable construction for frequent, everyday use
Cons
- Requires manual removal of the wheel and tire to install
- Not compatible with solid (puncture-proof) wheel systems
- Must be matched strictly to tire dimensions to prevent pinching
Setup, Compatibility & Care
To install this inner tube, first deflate the tire completely and use tire levers to pry the edge of the tire off the rim. Remove the old tube and carefully inspect the inside of the tire for any remaining sharp objects. Slightly inflate the new tube before inserting it into the tire; this prevents the tube from twisting or getting pinched during the seating process. Once installed, seat the tire bead back onto the rim and inflate slowly.
Compatibility check: Always confirm that your tire's sidewall specifically lists one of the supported sizes (12.5 x 2.50, 12.5 x 2.25, or 12 1/2 x 14). Keep the tire properly inflated at all times to maintain the longevity of the rubber compound.