Best current price£24.33from The Range
Shopping.co.uk recommended and popular offers
The Range£24.33Visit shop Jcp Fixings Steel Nail-In Anchors - 6 X 40Mm (Box Of 100) - Silver
Visit shop10 offers from £24.33 - £30.74
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and construction professionals seeking a reliable, heavy-duty fastening solution for concrete, brick, and similar materials. The JCP Fixings Steel Nail-In Anchors offer secure and durable holding power with a fast installation process, making them ideal for home improvement and construction projects. A key benefit is their robust steel construction, ensuring long-lasting performance, though they are designed for specific material types and may require appropriate tools for insertion.
| Colour | Silver |
|---|---|
| Model Part Number | FJMNI06040 |
| Brand | JCP Fixings |
These anchors are designed for secure, heavy-duty fastening of fixtures and fittings into solid materials like concrete and brick, suitable for both home improvement and construction.
No, these anchors are specifically designed for solid materials such as concrete and brick. They will not provide adequate support in hollow materials like drywall or plasterboard.
Mark your spot, optionally drill a pilot hole, insert the anchor, and then hammer the nail through the anchor until it is fully seated and flush with the surface.
For optimal performance, use a masonry drill bit slightly smaller than the diameter of the anchor. Refer to specific project requirements or manufacturer guidelines for precise sizing.
Yes, the zinc-plated, galvanised steel construction offers good corrosion resistance, making them suitable for many outdoor applications. However, in extremely corrosive environments, alternative materials like stainless steel might be preferable.
Each box contains 100 JCP Fixings Steel Nail-In Anchors.
Nail-in anchors are generally designed for permanent or semi-permanent fixings and can be difficult to remove without potentially damaging the surrounding material.
Ensure the material is solid and dense enough. If the material is too soft or hollow, the anchor will not grip. Consider using a different type of anchor suitable for the material. If the material is very dense, a pilot hole may be required.
This can happen in extremely hard concrete or brick. A pilot hole drilled with a masonry drill bit, slightly smaller than the anchor diameter, will ease insertion. Ensure you are using a hammer with sufficient weight.
Ensure the anchor is fully seated by hammering until flush. If it still protrudes, the hole may be slightly too large. Attempt to gently hammer the nail further in, or consider removing and using a slightly larger anchor if possible.
The zinc plating provides good protection, but in highly humid or corrosive environments, some surface corrosion may occur over time. For critical applications, consider stainless steel alternatives. Ensure stored anchors are kept in a dry environment.
Setup:
Compatibility:
Care:
