Best current price£11.75from eBay
Shopping.co.uk recommended and popular offers
eBay£11.75Visit shop Varilight XST3 Classic Matt Chrome 3 Gang 10A 1 or 2 Way Toggle Light Switch
Visit shop
B&Q£12.20Visit shop B&Q - Triple Toggle Light Switch 2-WayValue Matt Chrome With Chrome TogglesXst3
Visit shop6 offers from £11.75 - £16.91
View price history by clicking the chart icon.
The Varilight 3-Gang Toggle Light Switch is designed for homeowners and electricians looking for a durable, aesthetically pleasing control solution for multiple lighting circuits. This unit excels in providing a tactile, modern interface for both mains and low-voltage systems, though its metallic silver finish requires careful handling during installation to prevent cosmetic surface marks.
| Colour | Silver |
|---|---|
| Model Part Number | XST3 |
| Brand | Varilight |
This is a toggle switch, not a dimmer. It will function as an on/off switch for LEDs, but it cannot be used to adjust brightness levels.
It is recommended to use a standard 25mm or 35mm depth back box, depending on the amount of wiring present.
No, this product is rated for indoor use only and should not be exposed to moisture or extreme weather conditions.
Yes, the silver finish is designed to be consistent across the Varilight range of toggle switches and plates.
Yes, the switch is fully compatible with standard 240V mains lighting circuits.
Small surface scratches are difficult to remove from metallic finishes. Ensure careful handling during installation to avoid this.
Check that the faceplate is screwed securely to the mounting box. If the internal mechanism is damaged, the unit must be replaced.
Verify all wire connections are tight within the terminal blocks and ensure the load does not exceed the 10A rating.
Re-verify the wiring against the standard 2-way circuit diagram; incorrect wiring of the common and traveler terminals is a common cause.
Installation: This switch must be installed by a qualified electrician to ensure compliance with local electrical safety regulations. Always isolate the mains power supply at the consumer unit before removing an existing switch. Ensure the back box is deep enough to accommodate the switch mechanism and wiring.
Compatibility: This unit is suitable for use with most standard lighting circuits. Always check the total wattage of your bulbs to ensure it does not exceed the 10A capacity of the switch.
Care: To maintain the silver finish, wipe the faceplate gently with a soft, dry microfibre cloth. Avoid using abrasive cleaners, bleach, or solvent-based sprays, as these can damage the metallic coating and cause discoloration.
