Best current price£1,283.67from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£1,283.67Visit shop Qnap Black/Grey Tl-D1600s Storage Drive Enclosure Hdd/Ssd Enclosure 2
Visit shop2 offers from £1,283.67 - £1,540.40
View price history by clicking the chart icon.
The QNAP TL-D1600S is a 16-bay JBOD (Just a Bunch Of Disks) storage enclosure designed for users needing to expand storage for QNAP NAS, Windows, or Ubuntu computers and servers. Its key benefit is providing high-speed, flexible storage expansion via SATA 6Gb/s connections and SFF-8088/SFF-8644 interfaces. A potential caveat is that it requires a QXP PCIe card to be installed in the host device for connection.
| Model Part Number | TL-D1600S |
|---|---|
| Brand | QNAP |
JBOD stands for 'Just a Bunch Of Disks'. It's a configuration where multiple hard drives are presented to the operating system as individual volumes or combined into a single large volume, often managed by RAID software on the host system or a dedicated controller.
While not strictly necessary for most configurations, it is good practice to install drives sequentially and ensure they are of compatible types and sizes for your chosen RAID configuration. The QNAP JBOD Manager or QTS Storage & Snapshots will guide you through the setup.
Yes, you can mix SSDs and HDDs. However, for optimal performance and stability, it is generally recommended to keep SSDs and HDDs in separate storage pools or RAID configurations, as mixing them can limit the performance of SSDs to the speed of the HDDs in the same array.
You need a cable compatible with the SFF-8088 or SFF-8644 interface. The TL-D1600S typically comes with one such cable, and the host system requires a QNAP QXP PCIe card with a corresponding port.
The TL-D1600S is designed and managed primarily for Windows, Ubuntu, and QNAP NAS systems. Direct compatibility and management tools for macOS are not officially provided by QNAP for this model.
The enclosure supports sixteen 3.5-inch or 2.5-inch SATA drives. The total capacity depends on the size of the individual drives you install, up to the maximum supported by your host operating system and the QNAP management software.
The TL-D1600S uses SATA 6Gb/s and SFF-8088/SFF-8644 interfaces, offering good performance at a more economical price point than QNAP's SAS-based REXP enclosures. SAS enclosures typically offer higher bandwidth and more advanced features for enterprise environments.
Verify that the QXP PCIe card is correctly installed and seated. Ensure the SFF-8088/SFF-8644 cable is securely connected at both ends. Check that the enclosure is powered on and that the host system's operating system drivers are up to date.
Power off the enclosure and reseat the suspect drive. Test the drive in another bay or computer to rule out a drive failure. Clean the drive's SATA connectors if necessary.
Ensure you are using the correct SFF-8088 or SFF-8644 cable and that the host computer's PCIe slot supports the required bandwidth. Check the RAID configuration (e.g., RAID 0 offers higher speeds but no redundancy) and the health of all connected drives. Update firmware for the enclosure and the QXP card.
Immediately check if the fans are obstructed or dirty. If the alert persists after cleaning, one or more fans may need replacement. Contact QNAP support if the unit is under warranty.
Setup:
Compatibility:
Care:
