FTX Gladius Printed Lcg Body - FTX - Gladius
Best current price£39.95from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£39.95Visit shop FTX Gladius Printed Lcg Body (Grey) FTX10751G
Visit shopeBay£39.95Visit shop All Offers
2 offers from £39.95 - £39.98
View price history by clicking the chart icon.
FTX 1:10 Gladius LCG Rock Crawler Trail Truck Body Shell Painted - GreyFree delivery in 1–3 days£39.98Visit shop →
Product Information
Full details
This guide is for owners of the FTX Gladius RC model looking to replace or upgrade their body shell. The FTX Gladius Printed LCG (Low Center of Gravity) Body in Grey offers a direct fit and a sleek aesthetic, enhancing the vehicle's appearance and potentially its handling characteristics due to the LCG design. A minor caveat is ensuring compatibility with specific chassis revisions if your model has been heavily modified.
All features
| Series | Gladius |
|---|---|
| Model Part Number | FTX10751G |
| Brand | FTX |
Extended Product Information
FAQs
What material is the FTX Gladius LCG Body made from?
The body is made from durable, printed plastic designed for RC car applications.
Can I paint this body shell?
Yes, this body shell is designed to be painted. It is recommended to use polycarbonate-specific spray paints for best results.
What does LCG mean in the product name?
LCG stands for Low Center of Gravity. This design feature aims to lower the vehicle's center of gravity, which can improve stability and handling.
Is this body compatible with other FTX models?
This specific body (FTX10751G) is designed for the FTX Gladius. Compatibility with other models may vary and is not guaranteed without modification.
How do I attach the body to the chassis?
The body is attached using standard RC body clips that fit into pre-drilled or trimmed holes on the body and connect to the chassis's body mounts.
Does the body come pre-painted?
No, the FTX Gladius Printed LCG Body typically comes in a grey, unpainted finish, ready for custom painting.
Troubleshooting
Body does not fit correctly
Double-check that you have the correct body for your FTX Gladius model. Ensure all trimming has been done accurately along the recommended lines. Verify that no chassis modifications are interfering with the body's placement.
Paint is peeling or flaking
Ensure the inside surface of the body was thoroughly cleaned and degreased before painting. Use only polycarbonate-specific paints and apply them in light, even coats, allowing adequate drying time between layers.
Body cracks easily during use
Verify that the body was trimmed correctly and that no stress points were created. Ensure you are using appropriate body clips that do not put excessive pressure on the mounting holes. For heavy bashing, consider reinforcing high-impact areas with tape or specialized adhesives.
Pros and Cons
Pros
- Enhances the visual appeal of the FTX Gladius.
- LCG design can contribute to better on-track performance and stability.
- Made by the original manufacturer for a precise fit.
- Durable construction for regular use.
- Ready for custom paint jobs to personalize your RC car.
Cons
- May require trimming or modification for non-standard chassis setups.
- Painting requires proper surface preparation for best results.
- As a body shell, it offers limited protection to internal components during severe impacts.
Setup, Compatibility & Care
Setup:
- Carefully remove the old body from your FTX Gladius chassis.
- If necessary, trim the new LCG body along the designated cut lines for your specific model. Use a sharp hobby knife or lexan scissors for clean cuts.
- Transfer any existing body mounts or clips from the old body to the new one, or install new ones as needed.
- Secure the new body to the chassis using the appropriate body clips.
Compatibility:
- This body is designed specifically for the FTX Gladius model (part number FTX10751G).
- Always check that the LCG design is compatible with any chassis modifications you may have made, especially regarding internal components or suspension arms.
Care:
- Clean the body using a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic or any paint finish.
- For painting, use polycarbonate-specific spray paints (e.g., Lexan paints). Ensure the inside of the body is clean and free of oils or fingerprints before application. Apply paint in light, even coats.