Fascia Bargeboard Finial - 335mm - Grey

Bargeboard finials are a multi-purpose decorative piece used to cover the joint between the two ba...

Best current price£6.70from Professional Building Supplies

All Offers

2 offers from £6.70

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam Anthracite/Grey Fascia Bargeboard Finial - 335Mm Smooth
Free delivery in 1–3 days
£6.70
Visit shop
PVC Cladding UKFreefoam Anthracite/Grey Fascia Bargeboard Finial - 335Mm Smooth
Free delivery in 1–3 days
£6.70
Visit shop

Product Information

Full details

The Freefoam Fascia Bargeboard Finial (335mm) is an essential finishing component for homeowners and contractors seeking a professional, weather-resistant aesthetic at the roofline apex. Designed for seamless integration with PVC fascia systems, this finial effectively conceals the joint between bargeboards while maintaining a clean look; however, installers must strictly adhere to specific bonding techniques to ensure the structure can accommodate natural thermal expansion and contraction.

All features

ColourGrey
Model Part NumberFIN_1AG
BrandFreefoam

Extended Product Information

FAQs

Can this be used on timber bargeboards?

This product is specifically designed for PVC fascia systems and may not perform as intended when attached to timber due to different expansion properties.

Why do I need to use two different products (glue and silicone)?

Using glue on one side and silicone on the other allows for thermal expansion, preventing the finial from cracking or pulling away from the roofline.

What is the length of the finial?

The finial measures 335mm in length.

How do I clean the grey surface?

Use a soft cloth and a mild soapy water solution to maintain the finish; avoid harsh chemicals.

Is the finish UV stable?

Yes, Freefoam products are manufactured to resist UV degradation and maintain their color over time.

Troubleshooting

The finial appears loose after installation

Verify that the adhesive used on the anchor side has fully cured and that the silicone on the expansion side was applied correctly.

Visible gaps appearing at the joints over time

Check if the expansion allowance was too wide; re-apply a fresh bead of low modulus silicone to bridge the gap.

Pros and Cons

Pros

  • Provides a clean, professional aesthetic finish
  • High-quality weather-resistant PVC material
  • Perfectly sized at 335mm for standard roof apexes
  • Compatible with a wide range of PVC fascia systems

Cons

  • Requires specific adhesive and sealant knowledge
  • Not suitable for non-PVC bargeboard materials
  • Requires precise installation to avoid movement stress

Setup, Compatibility & Care

For successful installation, you must manage the PVC's movement. Glue only one side of the finial to the bargeboard using a high-quality PVC adhesive; this creates a firm anchor point. On the opposite side, use a low modulus silicone sealant. This method acts as an expansion joint, allowing the board to shift slightly due to temperature changes without breaking the seal. Maintenance is minimal; periodic cleaning with a soft cloth and mild soapy water will keep the grey finish looking new. Avoid using abrasive cleaners or scouring pads that could scratch the surface.

Similar items

Price History

DatePrice
Visit shop