Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Quick Drying High Coverage Aerosol Spray Paint Audi Mythos Black 300ml
Visit shop3 offers from £11.19 - £12.99
View price history by clicking the chart icon.
This Autotek car spray paint is specifically engineered for automotive enthusiasts and DIYers looking to perform precise touch-ups on vehicles finished in Audi Mythos Black (Paint Code: LY9T). It offers a professional-grade, acrylic-based finish that is both durable and weather-resistant, though achieving a factory-look result requires careful surface preparation and patient application of multiple thin layers.
| Colour | Black |
|---|---|
| Model Part Number | LY9T |
| Brand | Autotek |
| Container Volume | 300ml |
It is compatible with most automotive paint finishes, but it is always recommended to test on an inconspicuous area or scrap material first.
Yes, this paint is suitable for rigid plastic surfaces commonly found on vehicle bumpers.
While the paint is durable, applying an automotive-grade clear coat over the final layer will provide extra UV protection and depth to the finish.
The formula is fast-drying, but it is recommended to wait at least 30-60 minutes between coats and at least 24 hours for a full cure before washing the vehicle.
Mythos Black (LY9T) is a metallic finish; ensure you shake the can thoroughly to distribute the metallic flakes evenly.
Clear the nozzle by holding the can upside down and spraying for several seconds, or remove the cap and soak it in warm water or lacquer thinner.
You are likely holding the can too far away or applying layers too thick; use lighter coats and maintain a consistent distance of 20-30cm.
You are applying too much paint in one area. Stop immediately, allow the paint to dry fully, sand the area smooth, and re-apply with thinner, more controlled passes.
To ensure the paint adheres correctly, the surface must be thoroughly cleaned, degreased, and sanded if necessary to remove rust or rough edges. Shake the aerosol can vigorously for at least two minutes before use to ensure the pigments are properly mixed. Always perform a test spray on a piece of scrap cardboard to verify the nozzle flow and colour match before applying it to the vehicle. After finishing your project, hold the can upside down and spray for a few seconds to clear the nozzle, which prevents the tip from clogging for future use. Keep the container in a cool, dry place away from extreme temperatures.
