D-C-Fix Rustic Oak Self Adhesive Vinyl Wall Tiles - 300mm x 300mm

It is generally not recommended to apply directly over wallpaper, as the adhesive may not bond well and could damage the wallpaper upon removal. The surface must be smooth, stable, and clean.

With proper installation and care, the tiles can last for several years. Longevity depends on the application area, exposure to moisture, and maintenance.

The tiles can typically be removed, but it may require heat (e.g., from a hairdryer) to soften the adhesive. Some residue may remain, requiring cleaning. Removal might damage the underlying surface, especially if it's painted plasterboard.

Each pack covers 0.56 square meters, with each tile measuring 300mm x 300mm.

These tiles are designed for vertical wall applications and are not suitable for floor use.

No, these are self-adhesive tiles and do not require grouting. The clear film and optional silicone sealant create the finished edge.

These tiles are not designed to be painted over, as the vinyl surface may not accept paint well, and it could affect their durability and waterproof properties.

Ensure the surface is perfectly clean, dry, and smooth. Re-apply firm pressure. For stubborn areas, consider a very light application of tile adhesive spray suitable for vinyl, but test in an inconspicuous area first.

Carefully peel back the tile and reapply, smoothing from the center outwards with a firm, flat object (like a credit card or squeegee) to push air out. Prick stubborn bubbles with a fine needle and press flat.

Use a sharp craft knife and a metal ruler for straight lines. For curves, a sharp pair of scissors may offer more control. Score the vinyl first for cleaner cuts.

Ensure a continuous, unbroken bead of silicone sealant is applied along all edges and seams, particularly where the tile meets walls, countertops, or fixtures. Check and reapply sealant as needed.