Tamiya BB-01 Slipper Clutch Set - Tamiya 22071
Best current price£45.87from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£45.87Visit shop Tamiya BB-01 Aluminium Slipper Clutch Set TAM22071
Visit shopeBay£45.87Visit shop All Offers
5 offers from £45.87 - £53.99
View price history by clicking the chart icon.
Tamiya BB01 Slipper Clutch Set BBX Hop Ups 22071 NEW 1/10 RC£2.85 delivery£49.98Visit shop →
Tamiya 22071 BB-01 Slipper Clutch Set 1:10 RC Hop Up PartFree delivery in 1–3 days£51.95Visit shop →
Tamiya BB-01 Slipper Clutch SetFree delivery in 1–3 days£53.99Visit shop →
OnBuy.comTamiya 22071 Bb-01 Slipper Clutch Set 1:10 Rc Hop Up Part
Free delivery in 1–3 days
£52.47
Visit shop
Product Information
Full details
This Tamiya BB-01 Slipper Clutch Set is an essential hop-up part designed for 1:10 RC vehicles, specifically the Tamiya BB-01 chassis. It aims to enhance performance and protect your drivetrain by allowing controlled slippage under load. While it offers improved responsiveness, users should be aware that proper adjustment is crucial for optimal function and longevity.
All features
| Model Part Number | 22071 |
|---|---|
| Brand | Tamiya |
Extended Product Information
FAQs
What is a slipper clutch for an RC car?
A slipper clutch is a device that allows controlled slippage between the motor and the drivetrain. It helps absorb shocks, protect gears from damage, and can improve acceleration on various surfaces.
Is this slipper clutch compatible with other Tamiya chassis?
No, this specific set (22071) is designed as a hop-up part for the Tamiya BB-01 chassis. Compatibility with other chassis is not guaranteed.
How often should I check my slipper clutch?
It's recommended to check your slipper clutch periodically, especially after hard runs or impacts. Inspect the clutch pads for wear and ensure the adjustment remains set correctly.
How do I adjust the slipper clutch?
Adjustment is typically made via a nut and spring assembly. Tighten the nut to increase tension (less slip) and loosen it to decrease tension (more slip). Always refer to the manufacturer's manual for specific instructions.
What happens if I overtighten the slipper clutch?
Overtightening can negate the benefits of the slipper clutch, leading to increased wear on the drivetrain components (like gears) and potentially causing damage under load, as it will no longer slip when needed.
What happens if I undertighten the slipper clutch?
Undertightening will cause the clutch to slip too much, leading to a loss of acceleration, potential overheating of the clutch pads, and reduced efficiency.
Do I need any special tools for installation?
Basic RC car maintenance tools such as hex drivers, screwdrivers, and potentially a pinion gear removal tool are usually sufficient. Refer to the Tamiya manual for exact tool requirements.
Troubleshooting
Slipper clutch slips excessively, even when tightened.
Check for worn clutch pads. Ensure the adjustment spring and nut are correctly installed and not damaged. Clean components for debris.
No slippage detected, gears may be grinding.
The slipper clutch may be overtightened. Loosen the adjustment nut. Verify all components are installed in the correct order as per the manual.
Difficulty installing the set.
Refer closely to the Tamiya instruction manual provided with the set. Ensure you are using the correct tools and have adequate lighting. Seek help from experienced RC hobbyists if needed.
Reduced performance after installation.
Re-adjust the slipper clutch tension. Ensure no binding is occurring in the drivetrain. Confirm all parts are properly seated and secured.
Pros and Cons
Pros
- Improves RC car responsiveness and acceleration.
- Protects the drivetrain from damage due to impacts.
- Adjustable settings for various track conditions.
- Enhances the overall RC racing experience.
- Specifically designed for the Tamiya BB-01 chassis.
Cons
- Requires careful adjustment for optimal performance.
- May add a slight complexity to the drivetrain setup.
- Potential for increased wear on clutch pads if not adjusted correctly.
- Installation may require some mechanical aptitude.
Setup, Compatibility & Care Instructions
Compatibility: This slipper clutch set is specifically designed as a hop-up part for the Tamiya 1:10 scale BB-01 chassis. Ensure your vehicle model is compatible before purchasing.
Setup: Installation involves disassembling the gearbox and replacing the standard spur gear mount with the slipper clutch components. Follow the included Tamiya instruction manual carefully for precise assembly. Key steps include installing the clutch plates, spring, and adjusting nut. Proper adjustment of the slipper clutch tension is critical. Typically, this is done by tightening the adjustment nut until the slipper just begins to engage, then backing off slightly (refer to the manual for specific guidance). Test the slippage by holding the rear wheels firmly and applying throttle; you should hear a 'slipping' sound before the wheels turn.
Care: Regularly inspect the clutch pads for wear. If they become excessively worn or glazed, they will need replacement. Clean any dust or debris from the slipper clutch mechanism during routine maintenance. Store the components in a safe place when not in use.