Soudal Fix All Crystal Adhesive & Sealant - 290ml

Yes, it can be painted over with most water-based and synthetic paints once it has fully cured.

When stored in original, unopened packaging in a cool, dry place, the shelf life is typically 18 months from the date of manufacture.

Yes, it is suitable for both interior and exterior use due to its all-weather application properties and UV resistance.

Curing time varies with temperature, humidity, and bead size. A general guideline is approximately 24 hours for a 5mm bead at 20°C and 50% relative humidity. It becomes tack-free in about 15-20 minutes.

Yes, it is specifically designed for sanitary sealing in kitchens and bathrooms, offering excellent mould resistance and water resistance.

The product does not adhere to polyethylene (PE), polypropylene (PP), and PTFE (Teflon).

No, it has virtually no odour, making it comfortable to use in enclosed indoor spaces.

Uncured sealant can be wiped away with a cloth dampened with white spirit or Soudal Surface Cleaner. Cured sealant must be removed mechanically.

Ensure the nozzle tip is cut sufficiently and the inner foil seal is fully punctured. Check if the sealant has started to cure inside the tube.

Verify that the surface is clean, dry, and free from dust, grease, or old sealant. Ensure the material is not PE, PP, or PTFE, as the product will not adhere to these.

This can occur if applied too thickly or in very high humidity conditions. Ensure proper ventilation and allow sufficient curing time. Tooling off excess too late can also cause tackiness.

Ensure the surface was thoroughly cleaned of existing mould before application. While the product has XS1 fungicide protection, it cannot remove existing mould. Ensure good ventilation in the area.