Internal White Primed Pattern 10 Obscure Glass Door - XL Joinery - 1981 x 610 x 35mm

'Pattern 10' refers to a specific door design characterized by a single vertical panel, often associated with a more contemporary or minimalist aesthetic.

The obscure glass provides a high level of privacy, obscuring clear shapes and movement, but it is not completely opaque. It allows light to pass through.

No, this door is designed specifically for internal use only.

The 'primed' finish means the door has a base coat of primer applied. This prepares the surface for a final coat of paint, allowing you to choose the exact color and finish for your interior décor.

The door dimensions are 1981mm x 610mm x 35mm.

Yes, the door can be trimmed slightly on the edges, top, and bottom. However, care must be taken not to cut into the glass panel or compromise the door's structural integrity. It is recommended to consult a professional if unsure.

A high-quality interior paint, such as an eggshell, satin, or gloss finish, is recommended. Ensure compatibility with primed surfaces and follow the paint manufacturer's application instructions.

Check if the door has been trimmed too much, or if hinges are properly installed and aligned. Ensure the frame is square and the door is not binding.

Ensure the door was properly prepared and primed before painting. Use a high-quality paint suitable for interior doors and apply in a clean, dry environment. Allow adequate drying time between coats.

Use a non-abrasive glass cleaner and a soft microfiber cloth. For tougher spots, a paste of baking soda and water can be gently applied and then wiped clean.