Clarks Disc Brake Pads - VX845C, Tektro Lyra
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide helps cyclists understand and use Clarks VX845C disc brake pads, specifically designed for Tektro Lyra and IOX brakes. These organic pads offer improved noise reduction and enhanced 'bite' for standard riding conditions. However, performance can vary depending on riding style and environmental factors.
All features
| Series | VX |
|---|---|
| Model Part Number | CLP1845 |
| Brand | Clarks |
Extended Product Information
FAQs
What brake systems are these pads compatible with?
These pads are compatible with Tektro Lyra and Tektro IOX disc brake systems.
How do I install the brake pads?
Remove the old pads, insert the new pads into the caliper, and reassemble the brake system. Refer to the manufacturer's instructions for specific details.
How long do the brake pads last?
Pad life depends on usage, riding conditions, and rider weight. Regularly inspect the pads for wear.
How do I bed-in the new brake pads?
Perform several controlled stops from a moderate speed to transfer the pad material to the rotor surface.
What should I do if my brakes are squealing?
Check for contamination, ensure proper bedding, and clean your rotors.
Can I use these pads for downhill mountain biking?
While suitable for general riding, these pads may not be ideal for extreme downhill due to their organic compound.
What is the benefit of using organic brake pads?
Organic pads offer improved noise reduction and increased 'bite' in normal conditions.
Troubleshooting
Brakes squealing during use.
Ensure the pads are properly bedded in. Clean the rotors with disc brake cleaner. Check for contamination on the pads or rotors.
Poor braking performance.
Check pad wear and replace if necessary. Ensure the brake caliper is properly aligned. Inspect the rotors for any damage or contamination.
Brakes feel spongy.
Check brake fluid levels. Bleed the brakes to remove air in the system.
Pros and Cons
Pros
- Improved noise reduction compared to some other pad types.
- Enhanced braking 'bite' for responsive stopping.
- Compatible with a wide range of Tektro brake systems.
- Organic compound provides good performance in various conditions.
Cons
- Performance may degrade more quickly in wet or muddy conditions compared to sintered pads.
- May wear out faster than sintered pads under heavy use.
- Not ideal for extreme downhill or high-performance riding.
- Requires proper bedding-in for optimal performance.
Setup, Compatibility & Care
Ensure compatibility by checking your brake model (Tektro Lyra or IOX). Installation involves removing the old pads and inserting the new ones. For care, avoid contaminating the pads with oil or grease. Regularly inspect the pads for wear and replace them when necessary. Clean the rotors with a specific disc brake cleaner. For optimal performance, properly bed-in the new brake pads after installation by performing several controlled stops from a moderate speed. This process ensures the pad material transfers to the rotor surface, maximizing braking efficiency and minimizing noise.