Best current price£19.99from eBay
Shopping.co.uk recommended and popular offers
eBay£19.99Visit shop T-Cut Color Fast Mid Blue Ceramic Wax Polish Scratch Remover Colour Enhancer x2
Visit shop
B&Q£23.99Visit shop B&Q - Color Fast Mid Blue Ceramic Wax Polish Scratch Remover Colour Enhancer X2
Visit shop4 offers from £19.99 - £23.99
View price history by clicking the chart icon.
The T-Cut Color Fast Mid Blue Ceramic Wax Polish (CFC009) is designed for car owners seeking to restore and protect their mid-blue painted vehicles. Its key benefit is the ability to remove light scratches, oxidation, and imperfections while enriching color and leaving a protective shine in a single application. A caveat is that it should not be used on damaged clear coats, matte, or special effect paintwork. This product utilizes Variomorphic Ceramic Technology to clean, restore, and polish, making it a comprehensive paintwork renovator.
| Model Part Number | CFC009 |
|---|---|
| Brand | T-Cut |
T-Cut Color Fast is effective on *surface* scratches. A surface scratch is defined as one where you cannot feel an obstruction when passing a fingernail over the mark. Deeper scratches may only see an improved appearance.
No, T-Cut Color Fast should not be used on matt or special effect paintwork. It is designed for standard, glossy paint finishes.
The frequency depends on your car's exposure and conditions. For maintaining a protective shine, consider reapplying as needed, or as per the product's performance. Using T-Cut Final Glaze afterward can extend protection up to 12 months.
This is the advanced technology within T-Cut Color Fast that works to remove imperfections, enrich color, and provide a durable polish and shine to your car's paintwork.
No, you should not use T-Cut Color Fast if the lacquer coat (clear coat) is damaged, cracked, or crazed. This can cause further damage or an uneven finish.
It is recommended to use two high-quality microfibre cloths. Use one damp cloth for applying the product and a separate dry cloth for buffing off the haze to a shine.
If T-Cut Color Fast is applied to a panel of a different color, wash the affected area immediately with car shampoo and water to prevent unwanted color transfer.
Ensure you are using two clean microfibre cloths: one damp for application and a separate dry one for buffing. Buff thoroughly until a clear shine is achieved. Ensure the product has dried to a haze before buffing.
T-Cut Color Fast is designed for *surface* scratches (where you cannot feel an obstruction with a fingernail). If the scratch is deeper, the product can only help improve its appearance. For deeper scratches, professional repair may be needed.
This can occur if too much product was applied or if it was allowed to dry for too long without buffing. Apply in thinner layers and buff promptly after it hazes. If it becomes very hard, a slightly more damp cloth can help start the buffing process.
T-Cut Color Fast is specifically for mid-blue paint. Using it on other colors may result in an undesirable color transfer or finish. For other colors, use the appropriate T-Cut variant. If color transfer occurs, wash the area immediately.
Compatibility:
Application & Setup:
Care & Storage:
