Best current price£12.87from eBay
Shopping.co.uk recommended and popular offers
eBay£12.87Visit shop Voltz TX 9.6V 2000mAh NiMH Flat RC Transmitter Battery Pack VZ0180
Visit shopeBay£18.85Visit shop Voltz VZ0180 2000mAh 9.6v TX Flat Battery With Connector
Visit shop6 offers from £12.87 - £18.85
View price history by clicking the chart icon.
This Voltz Tx 9.6V 2000mAh NiMH Flat Battery Pack is designed for hobbyists using Scalextric, Hornby models, and radio control vehicles. It offers a reliable 9.6V power output and a 2000mAh capacity for extended use, ensuring easy integration with its flat design and included connector. While providing consistent power, users should be aware that NiMH batteries require proper charging protocols to maintain longevity.
| Model Part Number | VZ0180 |
|---|---|
| Brand | Voltz |
NiMH (Nickel-Metal Hydride) batteries are generally more affordable, safer, and easier to manage, but have lower energy density and can suffer from memory effect. LiPo (Lithium Polymer) batteries offer higher energy density (more power for their size/weight) and faster discharge rates but are more expensive, require specialized charging, and need careful handling to avoid safety risks.
Use a charger specifically designed for 9.6V NiMH battery packs. Follow the charger's instructions, typically involving a charge rate that allows the battery to charge fully without overheating.
Memory effect occurs when a NiMH battery is repeatedly recharged after only being partially discharged. The battery then 'remembers' this partial state and may behave as if its capacity is reduced. To mitigate this, try to discharge the battery more fully before recharging.
No, it is critical to use only chargers designed for NiMH batteries. Using chargers for other chemistries like LiPo or NiCd can lead to damage, fire, or explosion.
The lifespan of a NiMH battery depends on usage and care. With proper charging and storage, it can last for several hundred charge cycles. Factors like deep discharges and extreme temperatures can reduce its lifespan.
While specific dimensions are not provided, the 'flat design' indicates it is intended to fit into slimmer battery compartments. Always refer to the VZ0180 Declaration of Conformity for precise measurements if needed.
Ensure the charger is compatible with NiMH batteries and is properly connected to the battery and a power source. Check for any dirt or debris on the battery terminals and charger contacts.
The battery may be old or have been improperly stored/charged. Try a full charge cycle using a suitable NiMH charger. If the issue persists, the battery may need replacement.
Verify that the battery is correctly and securely connected to the device. Check the voltage compatibility; ensure the device requires 9.6V. Inspect the battery connector for any damage.
Disconnect the charger immediately. This could indicate a faulty charger or a damaged battery cell. Allow the battery to cool down completely before attempting to charge again with a different, known-good charger.
Setup:
This battery pack comes with a pre-attached connector, simplifying the setup process. Ensure the connector is securely plugged into the corresponding port on your device. Always verify polarity before connecting.
Compatibility:
The Voltz Tx 9.6V 2000mAh NiMH battery is primarily designed for compatibility with Scalextric and Hornby model train systems, as well as various radio control vehicles that utilize a 9.6V power source and a compatible connector. Always consult your device's manual to confirm battery voltage and connector type requirements.
Care:
