Best current price£5.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.49Visit shop B&Q - Ofc 6.35mm Stereo Jack Plug To Twin Phono Plugs Audio Cable Lead 15Cm
Visit shop1 offer from £5.49
View price history by clicking the chart icon.
This Kenable audio cable is designed for users needing to connect audio equipment for low-level signal transmission. Its primary benefit is providing a reliable, high-quality connection thanks to pure copper conductors. A potential caveat is its short 15cm length, limiting its use to very close proximity connections. Key features include OFC (Oxygen-Free Copper) cable, pure copper conductors, and a 6.35mm stereo jack to twin phono plug configuration.
| Model Part Number | 003483 |
|---|---|
| Brand | kenable |
OFC stands for Oxygen-Free Copper. Cables made with OFC conductors have fewer impurities, which leads to better conductivity, improved signal transmission, and reduced signal degradation over the length of the cable.
This cable is designed for line-level audio signals, not typically for low-level microphone signals which often require XLR connectors and different impedance matching. It is best suited for connecting audio sources to amplifiers or speakers.
The product information does not specify the exact AWG (American Wire Gauge) for the conductors, but it highlights that they are made of pure copper for optimal signal quality.
While the product description emphasizes OFC and pure copper conductors, it does not explicitly state the type or effectiveness of the shielding. For very sensitive environments or long runs where interference is a concern, further investigation into shielding specifications may be warranted, though its short length generally minimizes such issues.
If your source device has a 6.35mm stereo output and your destination devices have corresponding mono phono inputs (e.g., a stereo mixer input broken out into two mono channels), you can use this cable. Ensure you connect the correct phono plug (typically white for left, red for right) to the appropriate input channel.
This cable is intended for low-level audio signals, such as those from line-level outputs of instruments, media players, or mixers. It is not designed for high-power speaker-level signals.
Ensure the 6.35mm jack is fully inserted into the source device and the phono plugs are securely seated in the destination device. Check that the correct input is selected on the destination device. Inspect the cable for any visible damage.
Verify that all audio equipment is properly grounded. Ensure the cable is not routed near high-power electrical cables. Try a different cable to rule out a fault with this specific unit.
Confirm that the source device is outputting a stereo signal. Check the connections of both phono plugs, as one may be loose or improperly seated. Test the cable with different equipment if possible.
Setup: Simply plug the 6.35mm stereo jack into the corresponding output port on your audio source device (e.g., mixer, keyboard, audio interface). Connect the twin phono (RCA) plugs into the input ports of your destination device (e.g., amplifier, speakers, mixer). Ensure a firm connection at both ends.
Compatibility: This cable is designed for connecting devices with a 6.35mm stereo output to devices with standard phono (RCA) inputs. It is suitable for low-level audio signals and is commonly used for consumer and semi-professional audio equipment.
Care: To maintain optimal performance and longevity:
