HOVERAir X1 Aqua Basic Combo - HOVERAir

Yes, the HOVERAir X1 Aqua is IP67 rated, meaning it is dust-tight and protected against immersion in water up to 1 meter for 30 minutes. It is designed to float and operate on water surfaces.

No, the HOVERAir X1 Aqua weighs under 250 grams, which means it is generally exempt from registration requirements in most countries and regions.

The HOVERAir X1 Aqua comes with 128GB of integrated flash storage, eliminating the need for an external SD card.

While the drone features advanced AI and automated flight modes, control is primarily managed through the Lighthouse wearable device and its tracking capabilities. Manual piloting is not a primary function.

The Lighthouse is a wearable tracking and control device that works with the HOVERAir X1 Aqua. It allows the drone to autonomously follow subjects and enables basic command inputs.

Flight times vary based on usage, but typically range around 10-15 minutes per battery. The Basic Combo includes multiple batteries and a charging hub to extend your time in the air.

After using the drone in saltwater, it is crucial to rinse it thoroughly with fresh water and then dry it completely. This helps prevent corrosion on the internal and external components.

Ensure the battery is fully charged. Check the battery connection to the drone. Try a different charging cable or adapter.

Verify both devices are powered on and within range. Try restarting both the drone and the Lighthouse. Ensure no other Bluetooth devices are interfering.

Check that the lens is clean and free from smudges or water droplets. Ensure there are no strong radio interferences. Verify sufficient battery power.

Confirm the drone is properly placed on a stable water surface. Ensure the motors are clear of debris. Check that the waterproof seals are intact.

Ensure the Lighthouse is securely worn and has a clear line of sight to the subject. Avoid complex backgrounds or rapid, unpredictable movements if possible. Check for firmware updates.