Beko Fridge Freezer - BCFD473 - E Rated

Use a mild detergent and a soft cloth to clean the interior and exterior surfaces. Avoid abrasive cleaners. Regularly clean the door seals with warm soapy water to ensure a good seal.

Check to make sure the door is closed properly. If the door is closed correctly, check the seal for any obstructions or damage. If the problem persists, contact customer service.

Gently lift the shelf, tilt it, and pull it out. Reinstall the shelf at the desired height by inserting it into the shelf supports.

Yes, thanks to the Freezer Guard technology, it can operate in temperatures as low as -15°C. Ensure the garage temperature stays above this level.

This model is frost-free, so manual defrosting is not required. However, it's a good idea to clean the freezer compartment periodically to maintain performance.

The Beko BCFD473 has an energy efficiency class of E.

The product manual is usually included with the appliance. You may also find a digital version on the Beko website by searching for your model number (BCFD473).

Check the power supply, ensure the thermostat is set correctly, and inspect the door seals for a proper seal. Ensure that the vents inside the fridge and freezer are not blocked.

Ensure the door is closed properly. Check for any obstructions preventing the door from sealing correctly. If the door is properly closed, the alarm may be malfunctioning, and you should contact customer service.

Although frost-free, ensure the door is sealing correctly. Avoid opening the door frequently or for extended periods. If the issue persists, check the door seals and defrost the freezer, then monitor for recurrence.