Streetwize Tool Kit - 12V Cordless Drill With Accessories

The drill is suitable for wood, metal, plastic, and masonry (with the impact function and appropriate bits). The 18 torque settings and variable speed allow for precise work on various materials.

Battery life depends on usage intensity. A 2.0Ah Lithium-Ion battery typically provides 30-60 minutes of continuous use on a single charge for average DIY tasks. The battery capacity display helps monitor remaining power.

This 12V drill is primarily designed for home DIY and light to medium-duty tasks. For heavy-duty professional construction, a higher voltage drill (e.g., 18V or 20V) with more power might be more appropriate.

You can switch between drilling and driving screws by selecting the appropriate torque setting. For drilling, use the dedicated drill mode (often indicated by a drill symbol) or a low torque setting. For driving screws, select a torque setting appropriate for the screw size and material to avoid over-tightening.

Please refer to the product packaging or manufacturer's documentation for specific warranty information, as warranty periods can vary.

Yes, as long as the drill bits have a compatible shank size (up to 10mm for the keyless chuck) and are designed for the type of material you are drilling into, they should work with the drill.

The impact function is engaged by turning the mode selector ring on the drill body to the hammer/impact symbol. It works best when drilling into harder materials like brick or concrete and requires a firm pressure against the surface.

Ensure the battery is fully charged and correctly inserted into the drill. Check if the forward/reverse switch is in the neutral position; it must be set to forward or reverse to operate.

Verify that the battery is charged. Ensure the correct torque setting is selected for the task; higher torque settings provide more power. Clean any debris from the chuck and bit connection.

Confirm that the impact mode is selected. Ensure you are applying sufficient pressure against the material; the impact mechanism engages under load when drilling into hard surfaces.

Tighten the keyless chuck firmly around the bit shank. Ensure the bit is inserted straight and fully into the chuck. Check the chuck for any damage or debris.

Ensure the charger is plugged into a working power outlet and the battery is securely connected to the charger. Clean the battery and charger contacts with a dry cloth if they appear dirty.