Best current price£10.42from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£10.42Visit shop Liberon 014633 Teak Oil With Uv Filters 500Ml
Visit shop
B&Q£14.80Visit shop B&Q - 014633 Teak Oil With Uv Filters 500Ml Libtouv500
Visit shop22 offers from £10.42 - £31.59
View price history by clicking the chart icon.
Liberon Teak Oil is designed for owners of exotic and hardwood furniture, offering a nourishing finish that enhances natural beauty and provides protection. Its primary benefit is creating a durable, satin cabinet maker's finish while safeguarding against UV fading. A key consideration is its 24-hour drying time, requiring patience between coats. This oil blend, featuring tung and linseed oils, is suitable for both interior and exterior woodwork, including garden furniture and even toys due to its EN 71 approval.
| Model Part Number | 014633 |
|---|---|
| Brand | Liberon |
Liberon Teak Oil typically requires 24 hours for drying between coats. Ensure the surface is dry to the touch before applying subsequent coats.
This oil is specifically formulated for hard, exotic, and oily woods such as teak and iroko. It is not recommended for softwoods or woods that have been previously varnished or painted.
Yes, Liberon Teak Oil is suitable for both interior and exterior woodwork, including garden furniture, and offers UV protection against sunlight fading.
The wood surface must be clean, dry, and free from dust, grease, and old finishes. Light sanding of rough areas is recommended.
Liberon Teak Oil has a coverage of approximately 10-12 square meters per litre.
Yes, it is EN 71 approved, making it safe for use on children's toys.
Reapplication frequency depends on the item's exposure. For exterior furniture, reapply a thin coat once or twice a year, or when the wood starts to look dry.
Ensure excess oil was completely wiped off after application. Apply another thin coat and ensure thorough removal of any standing oil.
The wood may be very absorbent. Apply additional coats, allowing adequate drying time between each, until the desired finish is achieved.
Too much oil was applied or not enough excess was removed. Buff the surface with a cloth dampened with mineral spirits to remove the sticky layer, then allow to dry thoroughly.
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand any rough areas. For previously oiled surfaces, ensure they are clean and dry.
Application: Apply Liberon Teak Oil liberally along the grain using a clean, lint-free cloth or brush. Allow the oil to penetrate the wood for 15-30 minutes, then wipe away any excess oil that has not soaked in with a clean cloth. Apply a second coat after 24 hours if needed, following the same procedure. For full protection, multiple thin coats are recommended over successive days.
Compatibility: Ideal for teak, iroko, and other hard, exotic, or oily woods. Not recommended for softwoods or previously varnished/painted surfaces.
Care: Clean treated surfaces with a damp cloth. For maintenance, reapply a thin coat of Teak Oil as needed, typically once or twice a year depending on exposure.
