Pegler Yorkshire Tectite Female Pipe Fitting Coupler 15mm X ½"

The primary advantage is their push-fit technology, which allows for rapid, tool-free installation without soldering, saving time and increasing safety.

The fitting is designed to work with pipes conforming to relevant British Standards. While it often works with other compliant pipes, best results and guaranteed performance are achieved with pipes specified by the manufacturer.

For installation, no special tools are required beyond basic pipe preparation tools (cutter, chamfer tool). A Tectite de-mounting tool is needed for removal.

Pegler Yorkshire Tectite fittings are generally rated for standard domestic hot and cold water systems, typically up to 6 bar pressure and 82°C continuous operating temperature. Always refer to manufacturer specifications for exact ratings.

The pipe should be pushed in until it reaches the designated insertion depth mark. You will feel a positive engagement or 'click' as it seats correctly. A depth gauge or marker is recommended.

Yes, Tectite fittings are designed for reliable long-term performance and can be used in concealed applications, provided they are installed correctly and comply with local building regulations.

Pegler Yorkshire typically offers a comprehensive warranty on their Tectite range, often up to 30 years, subject to correct installation and usage. It's advisable to check the specific product documentation for the exact warranty terms.

Check that the pipe was inserted to the correct depth and that the pipe end was clean, smooth, and chamfered. Ensure the pipe is not damaged or deformed.

Verify that you are using the correct size pipe (15mm). Ensure the pipe end is not obstructed, damaged, or kinked. Check for any internal burrs or obstructions within the fitting itself.

Use the correct Tectite de-mounting tool. Ensure the tool is properly engaged around the fitting collar before attempting to twist and pull the pipe.

This can sometimes occur due to water flow dynamics. Ensure the pipe is fully inserted and the fitting is correctly installed. If persistent, check for any other system anomalies.