Tamron 18-300mm F/3.5-6.3 Di III-A VC VXD Lens - Sony E-mount

This Tamron 18-300mm F/3.5-6.3 Di III-A VC VXD lens is designed exclusively for Sony E-mount APS-C mirrorless cameras.

Yes, its VXD linear motor autofocus system provides quiet and agile performance, making it well-suited for video recording without distracting autofocus noises.

You can focus as close as 5.5 inches (14cm) at the 18mm wide-angle end, achieving a maximum magnification ratio of 1:2 for impressive close-up photography.

Yes, the lens features a 67mm filter size, allowing you to attach a wide variety of compatible lens filters, such as UV, polarizers, or ND filters.

'VC' stands for Vibration Compensation, which is Tamron's proprietary image stabilization mechanism. It helps reduce blur caused by camera shake, especially useful when shooting handheld at slower shutter speeds or longer focal lengths.

No, this lens is specifically designed for APS-C mirrorless cameras. While it can physically mount on a full-frame Sony E-mount camera, it will operate in APS-C crop mode.

While providing an extensive zoom range in a relatively compact body for its capabilities, specific weight information was not provided. Info needed: [Lens weight]. For its versatility, many find it an excellent travel companion as it replaces multiple lenses.

Ensure the Vibration Compensation (VC) is engaged if shooting handheld, especially at longer focal lengths or slower shutter speeds. Check your camera's shutter speed; a faster shutter speed might be needed to counteract motion blur. Also, confirm the focus mode and point are appropriate for your subject.

Ensure there is sufficient light on your subject for the autofocus system to work effectively. Check your camera's autofocus area and mode settings; switching to a smaller focus point or a more appropriate tracking mode might help. Clean the electrical contacts on both the lens and camera body with a dry, clean cloth.

Carefully remove the lens and re-attach it, ensuring it clicks securely into place. Clean the electrical contacts on both the lens mount and the camera body. Power off your camera, remove the battery for a few moments, then reinsert it and power on. Check for any available firmware updates for both your camera and the lens on the manufacturer's websites.

Inspect the zoom ring for any physical obstructions or debris. Avoid forcing the zoom ring if it feels excessively stiff. If the issue persists, professional servicing may be required. Do not attempt to disassemble the lens yourself.