Maxifix Red Plastic Wall Plugs - Dekton - Red - 100pc

These wall plugs are made from high-quality, durable red plastic.

The recommended drill bit size is typically indicated on the packaging or product details. For these red plugs, a 5mm or 6mm drill bit is commonly used, but always check the specific requirements for your wall type.

These plugs are suitable for light to medium-duty loads. For very heavy items, consider using stronger anchors like toggle bolts or sleeve anchors, or ensure the fixings are spaced appropriately.

They are suitable for plasterboard, brick, and concrete walls.

Each pack contains 100 red plastic wall plugs.

These plugs are designed for standard wood screws or self-tapping screws, typically ranging from 3mm to 5mm in diameter, depending on the specific plug and wall conditions.

The hole may be too large. Try using a slightly larger plug or ensure the correct drill bit size was used initially. For plasterboard, consider a toggle anchor if the hole is significantly oversized.

Ensure the drilled hole is deep enough for the plug. If not, carefully widen the hole slightly or use a hammer to gently tap the plug in further, being careful not to damage it.

Verify that the screw diameter and thread type are compatible with the plug. Ensure the plug is fully seated in the wall and not damaged. The screw may be too long or too short for the application.