Setup, Compatibility & Care
Setup
- Preparation: Clean the surface thoroughly, removing any loose paint, mold, mildew, wax, or oil. Sand the surface lightly for better adhesion if necessary.
- Protection: Cover surrounding areas with masking tape and drop cloths to prevent overspray.
- Application: Shake the aerosol can vigorously for at least one minute before use. Hold the can 6-8 inches from the surface and apply in even, sweeping motions.
- Coats: Apply multiple thin coats, allowing each coat to dry before applying the next. Refer to the can for specific drying times.
Compatibility
Auto Extreme Spray Paint is compatible with metal, wood, plastic, ceramic, and glass. For optimal results, ensure the surface is properly prepared with appropriate primers and surface treatments.
Care
Once the paint has fully cured, clean the surface with a soft cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals to protect the finish.