Shopping.co.uk

Permatex Gasket Maker - Copper - 80ml

Permatex Gasket Maker - Copper - 80ml

Supra Copper Gasket Maker. Tube, 80 ml. OEM specified. For high operating temperatures common in 4...

Best current price£11.36from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

6 offers from £11.36 - £16.94

View price history by clicking the chart icon.

eBayPermatex Supra Copper High Temperature Gasket Maker 80ml
Free delivery in 1–3 days
£11.36
Visit shop
B&QB&Q - Rtv Silicone Instant Gasket Maker Copper High Temperature Sealant 80Ml
Free delivery in 1–3 days
£11.49
Visit shop

Product Information

Full details

This guide is for anyone using Permatex Copper Gasket Maker to seal automotive or marine engine components. The primary benefit of this product is its ability to withstand high temperatures and resist a variety of fluids. However, it's important to note that it's not recommended for use on head gaskets or parts in contact with gasoline.

All features

ColourCopper
Model Part Number35144
BrandPermatex

Extended Product Information

FAQs

What is the temperature range of Permatex Copper Gasket Maker?

It withstands temperatures from -70°C to 350°C intermittently.

Can I use this product on my head gasket?

No, it is not recommended for use on head gaskets.

Is this product sensor-safe?

Yes, it is sensor-safe.

How long does it take for the gasket maker to cure?

It dries in 1 hour and fully cures in 24 hours. Allow more time in cold or dry conditions.

What surfaces can I apply this to?

It is suitable for use on exhaust manifolds, valve covers, oil pans, timing covers, and water pumps.

What should I use to clean the surfaces before applying the gasket maker?

Use a residue-free solvent to clean and dry the surfaces.

Is this product resistant to gasoline?

No, it is not recommended for use on parts in contact with gasoline.

What should I do if the gasket maker is not sealing properly?

Ensure the surfaces are clean and the application is done correctly. Reapply if necessary.

Troubleshooting

Gasket maker is not sealing properly, resulting in leaks.

Ensure surfaces are thoroughly cleaned and degreased before application. Check for any gaps or imperfections in the application and reapply if necessary.

Slow curing time.

Allow more time for curing in cold or very dry conditions. Ensure the product is within its expiration date.

Product is difficult to apply.

Make sure you cut the nozzle to the appropriate size (2-6mm) for proper bead formation and application.

Pros and Cons

Pros

  • Excellent for high-temperature applications, making it ideal for high-performance engines.
  • Provides superior resistance to oil and other automotive fluids.
  • Offers increased flexibility, leading to a better seal.
  • Safe for use with sensors, preventing potential damage.
  • Easy to apply with the tube design, allowing for precise bead size.

Cons

  • Not suitable for head gaskets or parts in direct contact with gasoline.
  • Requires proper surface preparation for optimal adhesion.
  • Full curing time is 24 hours, which might require downtime.
  • May require more time to cure in cold or dry conditions.

Setup, Compatibility & Care

Setup Instructions:

  1. Surface Preparation: Clean and dry all surfaces with a residue-free solvent. Ensure the surfaces are free of oil, grease, and old gasket material.
  2. Bead Application: Cut the nozzle to the desired bead size (1/16" to 1/4" or 2 to 6 mm). Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes.
  3. Assembly: Assemble parts immediately after applying the gasket maker.
  4. Tightening: Finger tighten bolts until the material begins to squeeze out around the flange.
  5. Curing: Allow to dry for one hour, then retighten 1/4 to 1/2 turn. The silicone dries in 1 hour and fully cures in 24 hours. Allow more time in cold or very dry conditions.

Compatibility: This product is compatible with a wide range of automotive and marine applications. However, it's NOT recommended for use on head gaskets or parts in contact with gasoline.

Care Instructions:

  • Clean hands with a dry cloth or Permatex Fast Orange Hand Cleaner after use.
  • Clean tools with a nonflammable cleaning fluid immediately after use.

Price History

DatePrice
Visit shop