Osmo Wood Wax Finish - Birch - 3136 - 5Ml

Coverage varies based on the wood type and application method, but generally, one liter covers approximately 12 square meters with one coat on finished surfaces. For rough wood, coverage is less. The 5ml sample is intended for testing and will cover a very small area (e.g., a few square inches).

Drying time is typically around 12-24 hours for recoating, but full curing can take up to 2-3 weeks, during which time the surface should be protected from heavy wear and moisture.

No, Osmo Wood Wax Finish is specifically designed for interior wood surfaces. For exterior applications, Osmo offers different product lines.

While the product is non-toxic when dry, it is not specifically certified for direct food contact. For cutting boards and kitchen countertops, Osmo recommends their TopOil or Polyx-Oil products.

Clean using a damp cloth and a mild, pH-neutral cleaning agent. Avoid using harsh chemicals or abrasive scrubbers, as these can damage the finish.

Osmo Wood Wax Finish is designed for bare wood or wood with compatible clear finishes. It is not intended to be applied over paint.

When stored unopened in a cool, dry place, Osmo Wood Wax Finish typically has a shelf life of at least 5 years. Once opened, it is best used within one year.

Ensure the product was applied thinly and evenly. Wipe off any excess product that has not penetrated the wood. Stir the product thoroughly before and during application.

This can occur if too much product was applied or if drying conditions were poor. Ensure adequate ventilation and apply thinner coats. If still sticky, try buffing with a soft cloth or applying a very thin maintenance coat.

The final color appearance is influenced by the wood type and grain. Always test the finish on a hidden area or a sample piece of the same wood before full application.

Ensure the finish has fully cured (this can take several days to weeks). If it's a fresh application, allow more time. If the finish is older, it may need a refreshing coat.