Car Gods Thick Snow Foam Blast Wash Car Shampoo - 500ml x 2

For optimal results, use with a pressure washer and foam lance. Dilute approximately 1 part shampoo to 4-5 parts water in the lance's reservoir and apply to the dry vehicle. Allow to dwell before rinsing.

Yes, you can. Add 2-3 capfuls to a bucket filled with warm water to create a rich, sudsy solution for hand washing.

Yes, the pH-neutral formula is designed to be safe for most automotive waxes and sealants when used as directed.

For foam lances, a common ratio is 1:4 or 1:5 shampoo to water. For bucket washes, 2-3 capfuls are usually sufficient for a full wash.

The scent provides a pleasant experience during washing but typically dissipates after rinsing and drying.

When stored correctly in a cool, dry place with the cap on, the product typically maintains its quality for at least 2-3 years.

While it can be used in cold weather, it is most effective when applied to a surface that is not frozen. Avoid washing in freezing temperatures to prevent water from freezing on the car.

Ensure the product is correctly diluted. For foam lances, check water pressure and foam lance quality. A higher concentration within the recommended range might be needed, or ensure the lance is clean and functioning correctly.

The dilution may be too strong. Rinse the vehicle thoroughly with plenty of clean water. Ensure all foam and suds are completely removed. For best results, consider using a rinse aid or drying the vehicle immediately after rinsing.

This can occur if too much product was used or if it was left to dry on the surface. Ensure thorough rinsing with a strong stream of water. If the vehicle has been left in direct sunlight, the product may dry too quickly.