Endon Lighting Ridgeton Wall Lamp - Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Endon Lighting Ridgeton Wall Lamp is for homeowners seeking to add a touch of refined elegance and enhanced illumination to their interior spaces. Its key benefit lies in its dual light source and timeless design, providing ample light with a sophisticated aesthetic. A caveat to consider is that dimming functionality requires the use of dimmable lamps.
All features
| Colour | Gold |
|---|---|
| Model Part Number | 118597 |
| Brand | Endon Lighting |
Extended Product Information
FAQs
What type of bulbs does this wall light use?
This wall light requires 2 x 6W Max E14 LED lamps.
Can I make this light dimmable?
Yes, the light is dimmable when fitted with compatible dimmable E14 LED lamps and connected to a suitable dimmer switch.
Is this light suitable for a bathroom?
No, this light has an IP20 rating, making it suitable for general indoor use only and not for areas with high moisture like bathrooms.
Do I need an earth wire for installation?
No, this is a Class 2, double insulated fitting, so an earth wire is not required for installation.
What are the dimensions of the Ridgeton Twin Wall Lamp?
The dimensions are: Height 340mm, Width 83mm, and Projection 87mm.
How should I clean the antique brass finish?
Clean the antique brass finish with a soft, dry cloth. Avoid using abrasive cleaners to maintain the finish.
Are the LED lamps included with the light?
No, the 2 x 6W Max E14 LED lamps are not included and must be purchased separately.
Troubleshooting
Light does not turn on
Check that the power supply is on and the circuit breaker is engaged. Ensure the E14 lamps are correctly installed and the bulbs are not faulty. Verify all wiring connections are secure.
Light flickers or dims inconsistently
This usually indicates an issue with the dimmer switch or the lamps themselves. Try replacing the lamps with new, compatible E14 LED dimmable bulbs. If the problem persists, the dimmer switch may need replacement.
Glass shade is loose
Carefully inspect the fitting mechanism for the glass shade. Ensure it is correctly seated and secured according to the installation manual. Do not overtighten.
Pros and Cons
Pros
- Provides significant illumination with its dual lamps.
- The antique brass finish and ribbed glass offer a timeless and elegant aesthetic.
- Dimmable capability allows for customizable ambiance.
- Suitable for feature walls or areas needing more light.
- Double insulated for added safety.
Cons
- Requires the purchase of two E14 LED lamps separately.
- Dimmable feature is dependent on the type of bulbs installed.
- IP20 rating means it's not suitable for bathrooms or high-moisture areas.
- Dimensions might be too large for very small spaces.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the main power supply is switched off at the circuit breaker before commencing installation.
- Mount the backplate securely to the wall according to the included instructions.
- Connect the wiring as per electrical safety standards. As the lamp is Class 2, double insulated, an earth wire is not required.
- Install two 6W Max E14 LED lamps (not included).
- Attach the ribbed glass shade.
- Restore power at the circuit breaker.
Compatibility:
- Requires 2 x 6W Max E14 LED lamps. Ensure lamps are compatible with dimmable switches if dimming is desired.
- Suitable for indoor use (IP20 rated).
Care:
- Always switch off the power before cleaning.
- Wipe the metalwork with a soft, dry cloth.
- Clean the glass shade with a slightly damp cloth and dry thoroughly. Avoid abrasive cleaners.