HOMCOM Vanity Mirror with Lights and Bluetooth Speaker - White - 80 x 60 cm

Typically, there are touch controls on the mirror surface. Short presses may cycle through color temperatures (e.g., warm, natural, cool white), while long presses usually adjust the brightness.

Turn on the mirror and ensure Bluetooth is active. On your phone, go to Bluetooth settings, scan for devices, and select the mirror's name (e.g., 'HOMCOM Vanity Speaker') from the list to pair.

The mirror comes with a power adapter that needs to be plugged into a standard electrical wall outlet.

The 10x magnifying mirror is integrated into the main mirror unit.

Yes, the lights and the Bluetooth speaker are designed to be used independently or at the same time.

The mirror has a viewing area of 80 cm in width and 60 cm in height.

The RGB LEDs are typically built behind a frosted or diffused panel. Clean this panel gently with a soft, slightly damp cloth. Ensure the unit is unplugged before cleaning.

Verify that the power adapter is securely connected to both the mirror and a working electrical outlet. Check if the power switch on the mirror is in the 'on' position.

Ensure the mirror's Bluetooth is enabled and in pairing mode. Make sure your device's Bluetooth is turned on and within range. Try turning both devices off and on again, or forget the device on your phone and re-pair.

Check the power connection for stability. If the issue persists, there might be an internal LED issue, and you may need to contact customer support.

Ensure your connected device's volume is turned up appropriately. Check that there are no obstructions between your device and the mirror. Try pairing with a different Bluetooth device to see if the issue is with the mirror or the original device.