Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek BMW Mini Pepper White High Coverage Aerosol Spray Paint Fast Dry 300mL
Visit shop4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
This Autotek Aerosol Spray Paint in BMW Mini Pepper White (300mL) is designed for car owners and DIY enthusiasts looking for a precise color match for their BMW Mini vehicles (2001-2019). Its key benefit is a fast-drying, high-coverage formula that delivers a professional, durable finish. A caveat to note is the requirement for good ventilation and specific temperature conditions during application.
| Colour | White |
|---|---|
| Model Part Number | MC183300 |
| Brand | Autotek |
| Container Volume | 300 |
This Autotek aerosol paint is compatible with BMW Mini models manufactured between 2001 and 2019.
The ideal temperature range for application is between 15°C and 25°C. Avoid applying in temperatures outside this range.
Yes, it is highly recommended to apply a minimum of two coats of Autotek Red Primer for optimum adhesion and the best possible finish.
The paint should be touch dry in 10-20 minutes after application. Full curing takes approximately 24 hours.
Yes, the paint contains protective properties suitable for metal, glass fibre, and rigid plastic surfaces.
After each application, turn the aerosol can upside down and spray for 2-5 seconds to clear any paint from the nozzle.
This product is intended for touch-ups and small repair jobs. For a full respray, professional application or larger quantities may be required.
Shake the can thoroughly for at least 2 minutes. Ensure the nozzle is clear by spraying upside down for a few seconds after use. If the problem persists, the nozzle may be clogged and require replacement or a new can.
Ensure the surface was properly cleaned, degreased, and primed before application. Re-clean the surface and re-apply following the preparation and application guidelines, including primer use.
Verify that you are using the correct paint code (850 for BMW Mini Pepper White). Ensure the original paint has not faded significantly; for very old paint, a professional color match may be needed.
Apply paint in thinner coats and maintain the recommended distance (15-25cm) from the surface. Allow adequate drying time between coats. If runs occur, let them dry and then gently sand them down before re-applying.
Preparation is Key: Before application, thoroughly clean the target surface, ensuring it's free from dirt, rust, wax, or oil. Mask off the surrounding areas carefully to prevent overspray. For the best results and adhesion, apply at least two coats of Autotek Red Primer and allow it to dry completely.
Application: Shake the aerosol can vigorously for approximately two minutes before use. Hold the can 15-25cm away from the surface. Apply several thin, even coats, allowing 10-20 minutes between each application. After each use, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
Drying and Curing: The paint will be touch dry within 10-20 minutes. Allow a full 24 hours for the paint to cure completely.
Environment: Use this product only outdoors or in a very well-ventilated area. Ensure the ambient temperature is between 15°C and 25°C for optimal performance.
Compatibility: Suitable for metal, glass fibre, and rigid plastic surfaces. Compatible with most automotive paint finishes and cellulose finishes.
