SMS PLP01 Primer SURFACER GREY 50ml
Best current price£11.95from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£11.95Visit shop SMS PLP01 Primer SURFACER GREY 50ml
Visit shopeBay£11.95Visit shop All Offers
2 offers from £11.95 - £13.95
View price history by clicking the chart icon.
OnBuy.comSms Plp01 Primer Surfacer Grey 50Ml 707959821723
Free delivery in 1–3 days
£13.95
Visit shop
Product Information
Full details
This guide is for model enthusiasts using the SMS PLP01 Primer SURFACER GREY 50ml to prepare plastic models for painting. The SMS Surfacers are designed to fill in small imperfections, providing a smooth surface for your paint. This product is specifically formulated for airbrushing straight from the bottle, though sanding may be required after application.
All features
| Colour | Grey |
|---|---|
| Model Part Number | PLP01 |
| Brand | SMS |
Extended Product Information
FAQs
What type of models is this primer suitable for?
The SMS PLP01 Primer SURFACER GREY 50ml is suitable for plastic model kits, including cars, planes, figures, and other plastic model projects.
Can I use this primer with a brush?
This primer is specifically formulated for airbrushing. While it *might* be possible to use with a brush, the results may not be as smooth or consistent.
How many coats of primer should I apply?
Apply thin, even coats. The number of coats needed depends on the model and any imperfections that need to be filled. Two to three coats are generally sufficient.
Do I need to thin the primer before using it?
No, the SMS Surfacers are specifically formulated for airbrushing straight out of the bottle.
How long should I wait between coats?
Allow each coat to dry completely before applying the next coat. Drying times may vary depending on environmental conditions, but generally, wait at least 30 minutes to an hour.
What type of sandpaper should I use for sanding?
Use fine-grit sandpaper (e.g., 400-grit or higher) for sanding the primer to achieve a smooth finish.
How do I clean my airbrush after using this primer?
Clean your airbrush immediately after use with a suitable airbrush cleaner or thinner. Disassemble the airbrush and clean all parts thoroughly.
Troubleshooting
Primer is not adhering to the plastic.
Ensure the plastic surface is clean and free of any oils. Lightly sand the surface to provide better adhesion.
Primer is running or pooling.
Apply the primer in thin, even coats. Avoid spraying too much primer in one area.
Primer appears rough after drying.
Allow the primer to dry completely and then lightly sand the surface with fine-grit sandpaper.
Pros and Cons
Pros
- Easy to apply with an airbrush.
- Fills minor imperfections effectively.
- Provides a smooth base for paint.
- Specifically designed for plastic models.
Cons
- Requires sanding after application for best results.
- May require multiple coats for significant imperfections.
- Requires airbrushing equipment.
- 50ml container might be limiting for large projects.
Setup, Compatibility & Care
- Preparation: Ensure your model is clean and free of dust or debris.
- Application: Use an airbrush to apply thin, even coats of the primer. Avoid applying too much primer in one go to prevent runs or pooling.
- Drying: Allow each coat to dry completely before applying the next coat or sanding.
- Sanding: Once dry, gently sand the surface with fine-grit sandpaper to achieve a perfectly smooth finish.
Compatibility: This primer is designed for use on plastic model kits.
Care: Store in a cool, dry place. Always clean your airbrush after use to prevent clogging.