Indesit Tumble Dryer - Silver - A+

Open the filter compartment, remove the filter, and remove any lint. You can rinse it under running water if necessary. Ensure it's completely dry before reinserting.

The water tank is usually located at the top or bottom of the dryer. Open the tank, pull it out, and empty the water. Then reinsert the tank.

The Anti-Crease function helps prevent wrinkles by tumbling the clothes periodically after the drying cycle is complete.

Select the desired drying program, then use the timer to set the delay time (up to 24 hours). The dryer will start automatically at the set time.

Consult the user manual for the specific error code and follow the recommended troubleshooting steps. You may need to reset the dryer or contact customer service.

It is generally not recommended to dry shoes in the tumble dryer, as it could damage the dryer or the shoes.

Follow the load capacity specified in the user manual for each cycle. Overloading the dryer can impact drying performance.

Check if the dryer is plugged in, the power outlet is working, and the door is closed securely. Ensure the start button has been pressed.

Check the filter and clean it. Ensure the vent is not blocked. Overloading the dryer can also affect drying performance. Choose the correct drying program for the fabric.

Reduce load size. Ensure the filter is clean. Check the selected drying program and adjust it to a higher heat setting if necessary.

Check for loose items, like buttons or coins, inside the drum. Contact customer service if the noise persists.

Refer to the user manual for specific error code meanings and troubleshooting steps.