Novecrafto Gravel Grid & Geotextile Membrane - Black

Each Novecrafto Gravel Grid & Geotextile Membrane kit covers an area of 2 square meters.

Angular gravel between 10mm and 20mm is recommended for best results. Rounded or very fine gravel may not lock as securely.

Yes, the gravel is not included in the kit and needs to be purchased separately.

Yes, it can be used on slopes. Ensure the sub-base is prepared to prevent slippage and the grids are securely interlocked and filled.

The gravel should be deep enough to fill the grid cells and sit flush with the top, typically between 40mm and 60mm depending on the grid depth.

Yes, the non-woven geotextile membrane is permeable, allowing water to drain through while preventing soil and weeds.

Yes, this kit is designed for driveways and parking areas, distributing weight to prevent ruts from standard vehicle traffic when installed correctly on a suitable sub-base.

Ensure the edges of the grids are clean and free from debris. Check that the grids are aligned correctly before attempting to connect them.

Confirm that the correct size and type of angular gravel have been used. Ensure the gravel is compacted into the grid cells and the surface is topped up to the level of the grids.

Check that the geotextile membrane is laid flat and not folded, which could impede drainage. Ensure the underlying sub-base has adequate fall for drainage.

Verify that the geotextile membrane was installed correctly with sufficient overlap and no tears. Ensure the gravel layer is thick enough to fully cover the membrane.