Richmond Basin and Pedestal - White

This basin has two tap holes and is compatible with standard basin pillar taps or mixer taps designed for a two-hole installation. You will need to select and purchase these separately.

No, the basin waste fitting is sold separately. You will need to choose a waste that is compatible with the basin's overflow and your plumbing system.

Clean the basin using a soft, damp cloth with a mild, non-abrasive soap or detergent. Rinse with clean water and dry thoroughly with a soft cloth to maintain the glossy finish.

A comfort height basin is taller than a standard basin, making it more ergonomic and accessible. It reduces the need to bend down significantly, which is beneficial for taller individuals or those with back issues or mobility limitations.

While the basin is designed to be used with its matching pedestal for support and aesthetic continuity, it is technically possible to wall-mount it using appropriate brackets if space is a constraint. However, this is not the intended installation method.

The overall height of the basin when fitted with the comfort height pedestal is 955mm.

The high-quality vitreous china surface with a gloss white finish is generally resistant to staining. Regular cleaning with mild detergents should prevent most common stains.

Ensure tap bases are securely seated and any provided seals or washers are intact. Tighten fixing nuts gently. If leaking persists, consider replacing internal tap seals.

Check the basin waste for blockages. Remove and clean the waste trap and overflow pipe. Ensure the waste is correctly installed and connected to the drain.

Verify that the pedestal is correctly seated under the basin and is stable on the floor. Ensure the basin itself is securely fixed to the wall. Professional installation may be required if instability persists.

For light marks, try a mild, non-abrasive cleaner and a soft cloth. For deeper scratches, consult a professional or consider a surface repair kit designed for ceramic or vitreous china.