Best current price£0.10from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£0.10Visit shop WAGO 216-241 Ferrule Sleeve 0.5 mm²/AWG 22 Insulated White
Visit shop14 offers from £0.10 - £31.62
View price history by clicking the chart icon.
The WAGO 216-131 is an uninsulated cable end sleeve designed for professionals and hobbyists working with 0.25 mm² (AWG 24) conductors. It provides a secure, reliable termination for terminal blocks, preventing strand fraying and ensuring high-quality electrical contact through its electro-tin plated finish. Note that as an uninsulated component, it requires careful handling during installation and is intended primarily for controlled, professional wiring environments where additional insulation may be provided by the terminal block itself.
| Model Part Number | 216-131 |
|---|---|
| Brand | WAGO |
No, these are strictly designed for 0.25 mm² (AWG 24) conductors. Using them with larger wires will result in an insecure crimp.
Yes, you should use a high-quality crimping tool that matches the small 0.25 mm² wire size.
Yes, the WAGO 216-131 is RoHS compliant, meeting environmental safety standards.
Yes, using ferrules is highly recommended for high-vibration environments to prevent individual strands from breaking or loosening.
WAGO's electro-tin plating process is designed for durability and will not peel under standard operating conditions.
Ensure the wire is stripped to exactly 7 mm and pushed fully into the ferrule before crimping.
Verify that your crimping tool is set for the correct wire gauge and that the ferrule size matches your conductor.
Check for excess metal burrs at the crimp point or ensure the terminal block port is fully open.
To achieve optimal performance, ensure you are using a precision crimping tool calibrated for 0.25 mm² ferrules. First, strip 7 mm of insulation from your wire. Insert the stranded conductor fully into the ferrule sleeve until the strands reach the end of the barrel. Place the sleeve into the appropriate die of your crimper and apply steady pressure until the cycle completes. To maintain the integrity of the connection, store the unused ferrules in a dry, dust-free environment to prevent oxidation of the tin plating. These are compatible with all standard terminal blocks designed to accept 0.25 mm² cross-sections.
