Blomus Entra Wall Mounted Door Stop - 8 cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Blomus ENTRA door stop is designed for homeowners and designers seeking an elegant solution to prevent doors from hitting walls. Its primary benefit is protecting walls and door hardware with a stylish, minimalist design. A potential caveat is its wall-mounted nature, requiring installation. This product combines aesthetic appeal with practical function, featuring durable stainless steel and a soft rubber buffer to absorb impact.
All features
| Model Part Number | 65 354 |
|---|---|
| Brand | Blomus |
Extended Product Information
FAQs
What are the dimensions of the Blomus ENTRA door stop?
The 8 cm model has dimensions of approximately 2.5 cm (width) x 2.5 cm (depth) x 8 cm (height).
What materials is the door stop made from?
It is constructed from matt stainless steel and a synthetic rubber buffer.
How is the door stop mounted?
It is a wall-mounted unit that requires installation with screws and wall anchors.
Can this be used on a skirting board?
This model is designed for wall mounting. Using it on a skirting board is not recommended and may not provide adequate support or function.
Is the rubber buffer replaceable?
The rubber buffer is integrated into the design and is not designed to be individually replaceable. However, the durable materials ensure it should last for the product's lifespan.
What is the warranty period?
Please refer to the retailer or manufacturer's website for specific warranty information, as it can vary.
Are there other sizes or colors available?
Yes, the Blomus ENTRA series is available in different lengths (e.g., 4 cm) and typically comes in a Silver/Black color combination.
Troubleshooting
Door stop is loose in the wall.
Ensure the wall anchor is properly seated and the screw is tightened. If the hole is too large, you may need to use a larger anchor or a different mounting method.
Door still hits the wall.
Adjust the position of the door stop slightly or consider if the door's swing arc is too wide for the chosen model's length.
Stainless steel shows discoloration or marks.
Clean gently with a damp cloth and mild soap. Avoid harsh chemicals. For minor scuffs, a stainless steel cleaner may be used following product instructions.
Pros and Cons
Pros
- Protects walls and door knobs from damage.
- Stylish and minimalist design that blends with decor.
- Durable materials ensure long-term use.
- Easy to install for most users.
- Effective at preventing doors from swinging too far.
Cons
- Requires drilling into the wall for installation.
- May not be suitable for all floor types (e.g., very thick carpets).
- Limited color options (Silver/Black).
- The 8 cm length might be too long for very tight spaces.
Setup, Compatibility & Care
Setup:
- Determine the desired stopping point for your door. Ensure the door knob will meet the buffer when the door is fully opened.
- Mark the wall at the chosen height (typically around 80 cm from the floor for the 8 cm model).
- Using appropriate drill bits for your wall type (e.g., plasterboard, brick), drill a hole for the included wall anchor.
- Insert the wall anchor into the hole.
- Screw the Blomus ENTRA door stop into the wall anchor until firmly secured.
Compatibility:
- Suitable for most standard interior doors.
- Best used on solid walls (drywall, plaster, brick, concrete) where anchors can be securely fastened.
- Ensure sufficient clearance between the door and the wall for the stop's dimensions.
Care:
- Wipe clean with a soft, damp cloth.
- Avoid abrasive cleaners or scouring pads, which can scratch the stainless steel finish.
- Periodically check that the unit remains securely fastened to the wall.