Kenable Keystone Pass Through CAT6A 90 Degree RJ45 Coupler - White

A keystone coupler is a type of connector that allows you to join two network cables together or extend an existing cable. This specific coupler has female RJ45 ports on both ends and a 90-degree angle.

This coupler is designed for UTP (Unshielded Twisted Pair) installations, which is common for CAT6A cabling in home and office environments.

This coupler is rated for CAT6A, meaning it supports network speeds up to 10 Gigabit Ethernet (10 Gbps).

While it might physically connect, it is designed and rated for CAT6A performance. Using it with CAT5e cables will limit your network speed to CAT5e specifications.

Yes, if both your modem and router have standard RJ45 Ethernet ports and you need to extend the cable in a tight space using a Euromod faceplate.

When installed correctly, the 90-degree angle is designed to manage cable routing efficiently and should not negatively impact CAT6A performance. However, excessive bending or strain on the cable near the coupler could degrade performance.

Wipe the exterior with a dry, soft cloth. Avoid using any liquids or harsh cleaning agents to prevent damage to the internal contacts or housing.

Verify that both ends of the network cable plugged into the coupler are securely seated. Check that the connected patch cables are functioning correctly and are fully inserted into the coupler. Ensure the connected network device and switch ports are active.

Confirm that all cables involved (including the one being extended and the patch cables) are CAT6A or higher rated. Check for any physical damage to the cables or connectors. Ensure the network switch and connected devices support the expected speeds.

Double-check that your faceplate is a Euromod standard keystone type. This coupler is specifically designed for that standard and may not fit other variations.