Draper Plasma Cutter - 60A - 230V - 70058

You can cut stainless steel, aluminum, and other metals up to 15mm thick.

It requires a 230V power supply and a 32A plug.

The duty cycle is 60% at 60A and 100% at 40A.

Yes, it has an integrated gas regulator.

Always wear a welding helmet, gloves, and protective clothing when operating the plasma cutter. Work in a well-ventilated area.

Regularly clean the torch and nozzles. Check for wear and replace consumables as needed.

The digital meter displays the amperage being used.

Check the power supply, ensure the power cord is properly connected, and that the breaker hasn't tripped. Check the air supply and ensure it is properly connected and at the correct pressure.

Check the amperage setting, and adjust it according to the metal thickness. Inspect the nozzle and electrode for wear and replace if necessary. Make sure the ground clamp is securely connected.

Check the air supply and ensure the torch is clean and free of obstructions. Ensure the ground clamp is properly connected to the workpiece.

Allow the machine to cool down; the thermal overload protection might have been triggered. Reduce the duty cycle by lowering the amperage or allowing the machine to cool down.