Best current price£6.62from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£6.62Visit shop Polypipe Waste Solvent Weld Abs Reducer 50Mm X 40Mm Ws59b Black
Visit shop1 offer from £6.62
View price history by clicking the chart icon.
The Polypipe Waste Solvent Weld ABS Reducer (50mm x 40mm) is designed for plumbers and DIY enthusiasts managing waste water systems. It provides a secure and reliable transition between 50mm and 40mm ABS pipes using solvent weld jointing, ensuring system integrity. A key caveat is that it's specifically for ABS solvent weld systems and requires appropriate solvent cement for installation. Its main features include durable ABS construction, secure solvent weld connection, and compatibility with other Polypipe waste components.
| Model Part Number | WS59B |
|---|---|
| Brand | Polypipe |
This reducer is specifically designed for use with ABS (Acrylonitrile Butadiene Styrene) pipes that use a solvent weld jointing method.
No, this reducer is designed exclusively for ABS pipes. Using it with PVC or MUPVC pipes will not create a secure or watertight joint.
You should use an ABS-specific solvent cement and primer. Always follow the solvent cement manufacturer's instructions for application and curing times.
The reducer connects a 50mm diameter pipe to a 40mm diameter pipe.
ABS can withstand typical domestic hot water temperatures, but it is primarily designed for waste water and not for continuous high-temperature or pressurized hot water systems.
Initial set is usually within minutes, but full cure and handling strength can take anywhere from 1 to 24 hours, depending on ambient temperature and humidity. Refer to the solvent cement manufacturer's guide.
Yes, ABS is generally suitable for outdoor use, but prolonged exposure to direct UV sunlight may cause degradation over time. Painting with UV-resistant paint can help mitigate this.
Ensure correct application of primer and solvent cement. Check that pipes were fully inserted and held during the initial set. Re-cut and re-joint if the leak persists.
Verify that the pipe is correctly chamfered and that excess primer or cement has not obstructed the socket. Ensure you are using the correct pipe and fitting sizes.
This usually indicates excessive force or incorrect solvent cement application. Ensure the pipework is properly aligned and avoid forcing joints. Allow adequate curing time before stressing the pipework.
Check the expiry date of the solvent cement and primer. Ensure surfaces were clean and dry before application, and that the correct type of solvent cement for ABS was used.
Setup:
Compatibility:
Care:
