Outsunny Smokeless Fire Pit - Square - Black

The fire pit features a secondary combustion system. Air is drawn in from the bottom and circulates between the walls, feeding the flames from above. This re-ignites smoke particles, leading to a cleaner burn with significantly less smoke.

For the best smokeless performance, use dry, seasoned hardwoods such as oak, maple, or hickory. Avoid using green wood, treated lumber, or trash, as these can produce more smoke and creosote.

While the fire pit is designed for outdoor use, it should not be placed directly on a combustible surface like a wooden deck. Always place it on a non-combustible surface such as concrete, stone pavers, or gravel to prevent fire hazards.

It is recommended to clean the fire pit after each use once it has completely cooled. Remove ash and wipe down the exterior with a damp cloth as needed to maintain its appearance and performance.

Please refer to the product's specific listing or manual for exact dimensions, as these can vary.

Some assembly may be required. Please consult the product manual included with your fire pit for detailed assembly instructions.

No, this fire pit is designed exclusively for outdoor use. Indoor use can be dangerous due to the risk of fire and carbon monoxide poisoning.

Ensure you are using dry, seasoned hardwood. Check that the secondary combustion vents are not blocked and that oxygen can circulate properly. Allow the fire to establish a strong base before adding more wood.

This may occur with prolonged exposure to the elements. Clean the affected area gently with a soft cloth and mild soap, then dry thoroughly. Consider using a protective cover when not in use. For rust, a metal polish suitable for outdoor furniture may help, followed by a protective coating if available.

Allow the fire pit to cool completely. Use a metal shovel or scoop to remove the ash. If ash is caked on, a stiff brush may help dislodge it. For very stubborn ash, a damp cloth can be used after cooling.

If significant warping or damage is observed, discontinue use and inspect for safety. Minor surface changes due to heat are normal, but structural integrity should be maintained.