Best current price£270.68from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£270.68Visit shop Innovate Motorsports MTX-D: Oil Pressure / Temperature Gauge - Black,white, Black/white
Visit shop3 offers from £270.68
View price history by clicking the chart icon.
The Innovate Motorsports MTX-D Dual Gauge is for performance enthusiasts and motorsport drivers who need to monitor critical engine parameters efficiently. Its key benefit is providing both oil pressure and oil/water temperature readings in a single, compact 52mm unit, saving space and cost. A potential caveat is the need for proper sensor installation and understanding of the MTS system for advanced use. This gauge displays oil pressure numerically (0-145 psi / 0-10 bar) and temperature via LED indicators, offering user-settable warnings, customizable aesthetics with interchangeable faces and bezels, and data logging capabilities through MTS serial connections.
| Model Part Number | 39130 |
|---|---|
| Brand | Innovate Motorsports |
The Innovate Motorsports MTX-D Dual Gauge operates on a standard 12V negative-ground system.
Yes, the included thermistor can be used to monitor either oil temperature or water/coolant temperature, depending on where you install the sensor.
The pressure unit can be toggled between PSI and Bar through the gauge's programming menu. Refer to the installation guide for specific steps.
The oil pressure can be read from 0 to 145 PSI (0 to 10 Bar).
The temperature range is from 49 to 138 degrees Celsius (120 to 280 degrees Fahrenheit).
Yes, the kit includes an electronic oil pressure sensor and a thermistor for temperature monitoring, along with all necessary cables and mounting hardware.
Yes, the gauge features MTS (Modular Tuning System) serial connections, allowing it to be linked with other compatible Innovate data logging devices for real-time data acquisition.
Verify that the power and ground wires are securely connected to a 12V source and a good chassis ground. Check the fuse if applicable.
Ensure the electronic pressure sensor is correctly installed and all connections are tight. Check for any air leaks in the pressure line.
Confirm the thermistor is properly installed in the correct port (oil or water) and its wiring is secure. Ensure the gauge is configured for the correct temperature sensor type.
Check that the MTS cable is securely plugged into both the gauge and the other MTS device. Ensure both devices are powered on.
Review the gauge's programming menu to ensure the warning thresholds for low pressure and high temperature are correctly set and enabled.
Setup: Installation involves mounting the 52mm gauge in a suitable location, connecting the included electronic oil pressure sensor and thermistor (for temperature) to the engine's respective ports. Power and ground connections are required. The MTS cable connects to the gauge and can be daisy-chained with other MTS devices. Refer to the installation guide for specific wiring and sensor placement.
Compatibility: The gauge is compatible with most 12V negative-ground vehicles. The MTS serial connection allows it to integrate with other Innovate Motorsports data logging devices like the MTX-L Plus or SCG-1.
Care: Clean the gauge lens with a soft, damp microfiber cloth. Avoid using abrasive cleaners or solvents, which can damage the lens or display. Ensure all sensor connections are clean and secure. Periodically check sensor wiring for any signs of wear or damage.
