Best current price£7.32from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.32Visit shop Kenable Dvi-D Digital Monitor Pc 18+1 Pin Male To Male Cable Lead 5M Gold
Visit shop
B&Q£7.99Visit shop B&Q - Dvi-D Digital Monitor Pc 18+1 Pin Male To Male Cable Lead 5M Gold
Visit shop4 offers from £7.32 - £7.99
View price history by clicking the chart icon.
This 5-meter Kenable DVI-D (18+1 pin) cable is designed for users who need a reliable digital connection between their computer's video card and a DVI-D monitor, projector, or plasma display. It ensures high picture quality by transferring uncompressed digital video directly, avoiding quality degradation from analog conversions. A key benefit is its true digital representation for a sharper, faster interface, but users should confirm DVI-D compatibility as other DVI types exist.
| Colour | Gold |
|---|---|
| Model Part Number | 006658 |
| Brand | kenable |
No, this is a DVI-D (Digital) cable. It is only compatible with DVI-D ports and will not work with DVI-A (Analog) or DVI-I (Integrated) ports if they are expecting an analog signal.
As a DVI-D Single Link cable, it typically supports resolutions up to 1920x1200 at 60Hz. For higher resolutions or refresh rates, a DVI-D Dual Link cable would be required.
No, this cable is specifically for DVI-D to DVI-D connections. Adapters are required for DVI-to-HDMI conversion, and compatibility can vary.
Each connector has thumbscrews. Gently tighten these screws once the connector is inserted into the port to ensure a firm and stable connection. Do not overtighten.
This refers to the pin configuration of the DVI-D connector. The '18' signifies the pins for digital video signals, and the '+1' pin is for clocking information. This specific configuration is characteristic of DVI-D Single Link.
The 5-meter length provides a good amount of reach for typical desktop setups, media centers, or connecting devices across a moderate distance. For exceptionally long runs, signal degradation might occur, and active cables or repeaters could be considered.
Verify that both the source and display are set to DVI-D input. Ensure the cable is securely connected at both ends and that the thumbscrews are tightened. Confirm that both devices have DVI-D ports and that the cable is not damaged. Try a different DVI-D cable if possible to rule out cable failure.
Check for a loose connection at either end. Ensure the cable is not bent sharply or kinked. If the issue persists, the cable might be faulty or the resolution/refresh rate set on the source device may be incompatible with the display's capabilities over this single link cable.
This cable has an 18+1 pin configuration for DVI-D. If your port has a different pin count (e.g., 24+1 for dual link or includes analog pins for DVI-I/DVI-A), it will not be compatible. Consult your device's manual to identify the correct port type.
Setup: To set up the Kenable DVI-D cable, ensure both your source device (e.g., computer graphics card) and your display device (e.g., monitor, projector) have DVI-D female ports. Connect one male end of the cable to the source device and the other male end to the display device. You may need to tighten the thumbscrews on each connector to secure the cable. Once physically connected, power on your devices and select the appropriate DVI-D input source on your display if it doesn't switch automatically.
Compatibility: This is a DVI-D Single Link (18+1 pin) cable. It is *only* compatible with DVI-D ports. It will *not* work with DVI-A (analog) or DVI-I (integrated, supporting both analog and digital) ports if they are expecting an analog signal. Always check your device's documentation and port type to ensure DVI-D compatibility.
Care: To maintain the cable's performance, keep the connectors clean and free of dust. Store the cable away from excessive heat, moisture, or sharp bends. When disconnecting, gently pull by the connector housing, not the cable itself.
