Best current price£13.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.75Visit shop B&Q - Milky 67.5Cm X 1.5M Eco-Line Static Cling Vinyl Windfow Film For Privacy And Décor
Visit shop2 offers from £13.75 - £15.49
View price history by clicking the chart icon.
This D-C-Fix static cling window film in white is designed for DIY enthusiasts seeking an easy and reversible way to add privacy or decorative touches to glass surfaces like windows, doors, and shower screens. Its key benefit is providing a cost-effective, adhesive-free alternative to blinds, offering 95% UV protection to prevent fading and reduce glare while allowing light through. A potential caveat is the need for careful application to avoid wrinkles or bubbles, although mistakes are easily corrected. It's an environmentally friendly, PVC-free solution that leaves no residue upon removal, making it ideal for renters and homeowners.
| Colour | White |
|---|---|
| Model Part Number | 331-8010 |
| Brand | D-C-Fix |
To remove, simply peel the film away from the glass, starting at a corner. If it's difficult, use a hairdryer on a low heat setting to gently warm the film, which can help soften the static cling. It should peel off cleanly without residue.
Yes, the D-C-Fix static cling film is designed to be reusable. Ensure you store it carefully by reapplying the protective backing paper or placing it between sheets of wax paper to maintain its static charge.
No, because it uses static cling and no adhesives, it will not damage the glass or leave any sticky residue behind upon removal.
The static cling side is the duller side that adheres to the glass once wet. The backing paper is a clear, protective film that you peel away before applying the static cling side to the glass.
It is recommended to apply the film to the interior side of the glass for best results and durability. Applying to the exterior may expose it to harsher weather conditions.
The white static cling film blocks very little light. It offers privacy by obscuring the view while still allowing a significant amount of natural light to pass through.
Ensure the glass was thoroughly cleaned and sufficiently wet before application. Re-wet the glass and reapply, ensuring the correct side (static side down) is applied to the glass.
Gently peel back the affected area and re-smooth it using a squeegee, ensuring all water and air are pushed out towards the edges. For stubborn bubbles, a pinprick may release trapped air, followed by smoothing.
Use a sharp craft knife or utility blade and a ruler for straight edges. Utilize the cutting grid on the reverse side for guidance. Ensure the film is laid flat on a protected surface before cutting.
This can occur if not enough water was used, or if the film was applied to a dirty surface. Try carefully peeling back a section and re-applying with more water and ensuring cleanliness.
Setup:
Compatibility:
Care:
