Setup, Compatibility & Care
Setup:
- Select the appropriate location on your masonry surface.
- Using a 10mm masonry drill bit, drill a hole to the desired depth, ensuring it is clean and straight.
- Insert the 10mm x 80mm wall plug into the drilled hole. It should fit snugly. Tap gently with a hammer if needed, but do not force it.
- The flanged head should sit flush against the wall surface.
- Insert your M8 coach screw (up to 80mm length) through the item you wish to fix and into the wall plug.
- Tighten the coach screw securely. The plug will expand within the masonry to create a strong hold.
Compatibility:
- Compatible with M8 coach screws up to 80mm in length.
- Requires a 10mm drill bit.
- Suitable for solid masonry materials such as brick, concrete, and stone.
- *Not* recommended for use in drywall, plasterboard, or hollow materials.
Care:
These nylon wall plugs are designed for permanent installation and require no ongoing maintenance. Ensure that any associated fixings (coach screws) are kept free from excessive corrosion.