Best current price£5.08from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£5.08Visit shop Primapress Pressfit Gas Fi Coupler 22Mm X 3/4"
Visit shop
The Range£7.30Visit shop Primapress Pressfit Gas 22X3/4" Fi Coupler - Grey
Visit shop5 offers from £5.08 - £8.77
View price history by clicking the chart icon.
The PrimaPress Pressfit Gas FI Coupler is designed for professional plumbing and HVAC installers who require a reliable, flameless solution for water, gas, and glycol pipe systems. Its primary benefit is the integration of a leak-before-press detection system that ensures immediate identification of unpressed connections, though users should note it requires compatible M-profile press tools for proper installation.
| Model Part Number | 22X3/4" |
|---|---|
| Brand | PrimaPress |
Yes, this coupler is specifically approved for gas applications.
The product comes with a 50-year warranty against manufacturing defects.
No, this fitting is exclusively designed for use with M-profile press tools.
Yes, it is fully compatible with water, gas, and glycol systems.
Yes, every unit includes batch information for full traceability.
The fitting is tested to perform reliably up to 24 bar.
Verify that the pipe was deburred properly and inserted to the correct depth; ensure the M-profile jaws were clean and correctly aligned.
Confirm you are using an M-profile jaw set; V-profile or other jaw types will not fit this product correctly.
Check if the fitting was pressed at all; the leak-before-press feature is designed to leak if the tool cycle was missed or incomplete.
To ensure a successful installation, first cut the copper tubing squarely and remove any burrs from the pipe end. Mark the insertion depth on the pipe to confirm the tube is fully seated in the fitting. Position the M-profile press tool jaw squarely on the fitting and activate the tool until the cycle is complete. For maintenance, simply wipe the exterior with a dry cloth; the copper composition is naturally corrosion-resistant. Store the fittings in a dry area and ensure they are protected from contaminants until the moment of installation. Always verify your specific press tool is calibrated for M-profile fittings before beginning work.
