Liberon Pure Tung Oil 5 Litre - LIBTO5L

Liberon Pure Tung Oil is a natural wood finish made from 100% pure tung oil. It provides a durable, water-resistant, and food-safe matt finish for interior and exterior wood.

Yes, because it is pure and contains no added dryers, it is non-toxic and safe for use on kitchen worktops, salad bowls, cutting boards, and other items that come into contact with food.

For best results, apply 3-6 thin coats. Allow each coat to dry for at least 24 hours before applying the next, wiping off all excess oil after each application.

Yes, it is recommended for use on exterior oak to provide protection against the elements while maintaining a natural appearance.

The drying time for pure tung oil is longer than many synthetic finishes. Allow at least 24 hours between coats, and potentially longer in cool or humid conditions. The final cure can take up to 14-21 days.

Clean with a damp cloth and mild soap. Avoid harsh detergents or abrasive cleaners. Minor wear can be touched up with an additional thin coat of tung oil.

No, Liberon Pure Tung Oil leaves a natural matt finish that enhances the wood grain without adding gloss.

This usually means excess oil was not removed properly. Apply a clean cloth dampened with white spirit to wipe away the excess, then allow to dry thoroughly. Ensure complete removal of any standing oil in future applications.

Ensure the oil was applied evenly and excess was removed consistently. Sand down the affected area lightly, clean, and reapply thin coats, ensuring thorough wipe-off of excess oil.

Pure tung oil has a natural drying time which can be extended by low temperatures or high humidity. Ensure adequate ventilation and a consistent temperature (ideally 15-20°C) during application and drying.

The surface may not have received enough coats or the oil has worn away. Clean the area, allow it to dry completely, and reapply one or two thin coats of tung oil, ensuring excess is wiped off.