DT Swiss Rim Tape - 32 mm x 10 m
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This DT Swiss Rim Tape is for cyclists seeking a reliable tubeless setup across various disciplines, from cross-country racing to downhill. Its key benefit is providing a secure rim seal for a tubeless conversion. A caveat is that non-DT Swiss rim compatibility requires careful size selection based on internal rim diameter.
All features
| Model Part Number | RXTAPE32 |
|---|---|
| Brand | DT Swiss |
Extended Product Information
FAQs
What is the purpose of this rim tape?
This tape is used to create an airtight seal on your bicycle rims, enabling you to set up your tires as tubeless, which can improve ride quality and reduce the risk of punctures.
How many wheels can I tape with one roll?
The 10-meter roll is typically sufficient to tape five wheels, including larger 29er sizes.
How do I choose the correct tape width for non-DT Swiss rims?
For non-DT Swiss rims, it's generally recommended to select a tape width that is approximately 2mm wider than the internal diameter of your rim. This ensures the entire rim bed and spoke holes are covered.
Can I use this tape for standard clincher tires?
This tape is specifically designed for tubeless setups. While it might physically cover the spoke holes, it is intended to create an airtight seal for tubeless systems.
What is the recommended method for applying the tape?
Start opposite the valve hole, apply smoothly without creases, stretch slightly as you go, overlap by 10-15 cm, and then carefully puncture the valve hole.
How long should the tape last?
The lifespan of the tape depends on riding conditions and maintenance. It should ideally maintain its seal for a long time, but may need replacement if leaks develop or it becomes damaged.
Does this tape come in different widths?
This specific product is the 32mm width. DT Swiss may offer other widths; always check product specifications for availability.
Troubleshooting
Tape not adhering properly
Ensure the rim surface is perfectly clean and dry. Reapply the tape, ensuring firm pressure is applied during installation to activate the adhesive.
Air leaks around the rim edge
Verify the tape width is appropriate for the rim's internal diameter. Ensure the tape covers the entire rim bed and overlaps sufficiently. Check for any small punctures or tears in the tape.
Tape creating a bumpy surface
Carefully remove the tape and reapply, smoothing out any wrinkles or bubbles as you go. Stretching the tape slightly during application can help it conform to the rim bed.
Difficulty puncturing the valve hole
Use a sharp, pointed object or carefully screw in the tubeless valve through the tape. Ensure the valve stem creates a seal with the tape.
Pros and Cons
Pros
- Effective tubeless conversion for various riding styles.
- Sufficient length for multiple wheelsets.
- Aids in maintaining tire pressure and reducing flats.
- Simple to apply for a secure rim seal.
Cons
- Non-DT Swiss rim compatibility requires careful measurement.
- May not perfectly fit all non-standard rim profiles.
- Requires proper application technique for optimal performance.
Setup, Compatibility & Care
Setup:
- Ensure your rim is clean and dry.
- Start by applying the tape at the opposite end of the valve hole.
- Carefully lay the tape along the rim bed, ensuring it adheres smoothly without creases or bubbles.
- Overlap the tape by about 10-15 cm at the end, ensuring it covers the valve hole completely.
- Puncture the tape carefully at the valve hole location using a sharp tool or the valve itself.
- For optimal adhesion, stretch the tape slightly as you apply it.
Compatibility:
- DT Swiss Rims: Designed for direct compatibility. Refer to the DT Swiss website for specific rim width recommendations.
- Non-DT Swiss Rims: It is recommended to choose a tape width that is 2mm larger than the internal rim diameter. For example, a 25mm internal rim diameter typically requires a 27mm tape. This general guideline ensures complete coverage of the rim bed and spoke holes. Note that rim profiles can vary, so this may require adjustment.
Care:
- Clean rims thoroughly before application. Dried sealant or dirt can compromise adhesion.
- Store the tape in a cool, dry place away from direct sunlight to maintain its adhesive properties.