Best current price£37.20from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£37.20Visit shop Pegler Belmont Angled Thermostatic Radiator Valve 15Mm 686002
Visit shop
B&Q£48.36Visit shop B&Q - Belmont Angled Thermostatic Radiator Valve 15mm 686002
Visit shop2 offers from £37.20 - £48.36
View price history by clicking the chart icon.
This Pegler Belmont Angled Thermostatic Radiator Valve (15mm, MPN 686002) is designed for efficient heating control on new or existing radiator installations. It allows users to regulate room temperature by automatically adjusting radiator output, saving energy and improving comfort. A potential caveat is its vertical angled design, which may not suit all pipework orientations.
| Model Part Number | 686002 |
|---|---|
| Brand | Pegler |
The main benefit is automatic temperature control, allowing you to set and maintain a desired room temperature, which saves energy and enhances comfort.
This 15mm valve is suitable for most standard radiators that have a 15mm connection point. Always check your existing setup.
It means the valve is designed with an angle that allows for an upright connection, typically used when the pipework emerges vertically from the floor or wall to connect to the radiator.
Basic installation is possible for those comfortable with plumbing. However, if you are unsure, professional installation is recommended to ensure a proper and leak-free fit.
The valve head typically has numbered settings corresponding to different temperatures. Turn the head to the desired number; higher numbers indicate higher temperature settings.
This is a standard manual thermostatic radiator valve and does not have built-in smart home connectivity. For smart control, you would need a dedicated smart TRV.
Generally, these valves require minimal maintenance. Periodically check for leaks and ensure the valve head moves freely. Professional servicing is usually only needed if issues arise.
Ensure the valve head is not set to the lowest setting or '0'. Check that the pin inside the valve body can move freely; if stuck, carefully try to free it. Ensure the heating system is operational.
Check that all connections are tight. If the leak persists from the valve body, the internal seals may need replacing or the valve may need to be replaced.
Allow the room temperature to stabilize for a few hours after setting the desired temperature. Ensure the valve is not located in a draft or near a direct heat source, which can affect sensor readings.
Gently try to rotate the valve head. If it remains stiff, it may require servicing or replacement.
Setup:
Compatibility:
Care:
