Green & Taylor Cottage Oak - Prefinished Fire Door

Best current price£125.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£125.99Visit shop B&Q - Cottage OakPrefinished Internal Door
Visit shop
Best current price£125.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£125.99Visit shop B&Q - Cottage OakPrefinished Internal Door
Visit shop14 offers from £125.99 - £138.99
View price history by clicking the chart icon.
The Green & Taylor Cottage Oak Prefinished Fire Door is an ideal solution for homeowners, renovators, and developers seeking a blend of classic aesthetic appeal and essential safety features. This FD30-rated door provides 30 minutes of certified fire protection while featuring a warm, prefinished oak veneer that eliminates the need for on-site staining or painting. While the door offers exceptional value and ease of installation, users should be aware that the high-density particleboard core makes the unit significantly heavier than standard hollow-core internal doors.
| Brand | Green & Taylor |
|---|
The door is supplied as a fire-resistant unit, but the intumescent seals are usually installed into the frame or the door edge separately. Always check your specific local fire safety requirements.
Yes, you can trim up to 8mm total, which means 4mm from each edge, thanks to the 10mm solid lippings. Do not exceed this limit as it will compromise the fire-rated core.
Yes, provided the bathroom has adequate ventilation. The veneer is moisture-resistant, but it is not waterproof; avoid direct, prolonged exposure to splashing water.
FD30 indicates the door has been tested to provide at least 30 minutes of fire resistance when exposed to flames, helping to contain fire and smoke within a room.
Yes, because the door is heavy due to the fire-resistant core, you must use high-quality, fire-rated hinges to support the weight and maintain the fire seal.
Check if the hinges are correctly recessed and the door is level. If it still catches, you may lightly sand the edge, ensuring not to exceed the 4mm trimming limit per side.
Intumescent strips are critical for fire safety. If damaged, they must be replaced immediately with an equivalent fire-rated strip compatible with the door assembly.
Ensure that three heavy-duty, fire-rated hinges are installed properly. Two hinges are typically insufficient for an FD30 fire door of this weight.
To ensure fire certification remains valid, the door must be installed by a competent person following building regulations, including the use of appropriate intumescent strips and fire-rated door furniture. While you can trim up to 8mm from the edges, ensure all exposed wood surfaces from trimming are sealed with a suitable finish to maintain the moisture barrier. For ongoing care, simply wipe the door down with a soft, lint-free cloth. Avoid the use of harsh chemicals or abrasive cleaners, which can damage the prefinished oak veneer. Regularly inspect the hinges and hardware to ensure the door closes smoothly into the rebate without excessive force.