Creosote Substitute Timber Treatment - Bartoline - 2XCreocote - Dark Brown - 4Ltr
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Bartoline 2XCreocote is a high-quality, oil-based timber treatment designed for homeowners and DIY enthusiasts looking to protect and preserve outdoor wooden structures like fences and sheds. Its key benefit is providing excellent, durable protection against weathering and decay with an economical coverage rate. A potential caveat is its dark brown color, which may not suit all aesthetic preferences.
All features
| Model Part Number | 2XCreocote |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
What is the coverage rate of Bartoline 2XCreocote?
The coverage rate is approximately 8m² per liter.
Can I use this on garden furniture?
While designed for fences and sheds, it can be used on garden furniture if the dark brown finish is desired and the wood is suitable for oil-based treatments. Ensure it is fully dry and cured before contact.
How long does it take to dry?
Drying times can vary depending on temperature, humidity, and application thickness. Typically, it is touch-dry within a few hours, but a full cure may take 24-48 hours.
Can I paint or varnish over this product?
It is not recommended to paint or varnish over Bartoline 2XCreocote as it is designed to be a final finish. If you wish to apply another finish, test compatibility on an inconspicuous area first.
What safety precautions should I take?
Use in a well-ventilated area. Wear protective gloves and eye protection. Keep away from heat, sparks, and open flames. Dispose of waste material safely according to local regulations.
Is this product suitable for decking?
Yes, it can be used on decking, but it is not a specialized decking treatment. Ensure the surface is non-slip after application, as oil-based treatments can sometimes create a slippery surface when wet.
How should I clean up spills?
Clean up spills and tools immediately with white spirit or a similar solvent.
Troubleshooting
Uneven color or patchy coverage
Ensure the product was thoroughly stirred before and during application. Apply thin, even coats. If the wood is very porous, a second coat may be necessary after the first has dried.
Product is too thick to apply easily
In colder conditions, gently warm the container (do not heat directly). If necessary and recommended by the manufacturer, a small amount of appropriate solvent may be added, but this can affect coverage and durability. Stir well.
Odor persists after application
Allow adequate drying time in a well-ventilated area. The characteristic odor of oil-based treatments will dissipate over time. Ensure good ventilation during application and drying.
Pros and Cons
Pros
- Provides excellent weather and decay protection for outdoor timber.
- High coverage rate makes it cost-effective for large areas.
- Enhances the natural appearance of wood with a rich dark brown color.
- Easy to apply with standard tools.
- Suitable for a variety of wooden structures.
Cons
- Oil-based formula may require specific cleanup procedures.
- The dark brown color is permanent and may not be suitable for all projects.
- Requires adequate ventilation during application due to its solvent base.
- May require multiple coats for optimal protection depending on wood condition.
- Not suitable for interior use or treated timbers where a different finish is desired.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the timber surface is clean, dry, and free from dust, dirt, and loose material.
- Stir the product thoroughly before and during application.
- Apply using a brush, roller, or sprayer.
Compatibility:
- Suitable for use on bare or previously treated softwood and hardwood timbers.
- Not recommended for use on plastic, metal, or previously painted surfaces unless the paint is completely removed.
- Check compatibility with existing treatments if unsure.
Care:
- Clean application tools immediately after use with a suitable solvent (e.g., white spirit).
- Store the container in a cool, dry place, away from direct sunlight and sources of ignition.
- Ensure the lid is tightly sealed when not in use.